Hi everyone,
Tomorrow I will be replacing my plugs and front and rear brake pads, Plus changing fluid in
brakes and clutch. Tonight I just took off...
Last post
4 very small passageways are cast into the cylinder head leading from the plug wells down to the rear bottom of the cylinder head casting. They exit...
How does the black saddlebag trim come off? I found and removed one screw from the inside of the saddlebag but the trim is still firmly attached. My...
Ive seen lots of talk about using sea foam in the oil and in the gas. where do I buy the sea foam and how much do I use in a full tank of gas and...
Last post
I but 6 oz in every 3rd tank of fuel in the voyager. I also but 1 oz to one gallon in my chain saw/ weedeater gas also. Saws start easier and seam to...
When I went to replace the old plugs on my Voyager, I succeeded in pulling the wires out of the caps on the #2 and 3 cylinders. The ends of the wires...
Last post
Good tip - 7mm wire is sometimes kind of hard to find. When I replaced my plug wires, I went with Packard 440 copper core, as per C. Leo. It was...
Good day to you all. I have been looking at this site for years. Its been a long time since my last post. So long in fact I forgot my old name and...
Last post
Thanks for your concern, and advise I do most of my own service as well. This was a weak moment to help out a local shop. He is now out of bussness ....
I searched the forums, but I could not find any posts on alternative mirrors. I am aware of the extenders, but I am interested in replacement...
Last post
I've never seen alternative mirrors that are a plug 'n play replacement for the stock mirrors. I did experiment once with a pair of left over mirrors...
Hi I'm new to this forum,so I hope I'm posting in right section. I have a 1994 voyager I got from my brother about a year ago . My problem is I have...
Last post
The rear end gear noise usually starts around 50mph and quiets down some around 70. Leaning into curves won't make a difference.
Stopped at my local dealer to get a price on a Dunlop front tire. WOW!! They were $50 higher than buying online! Wouldn't match either. Plus I'd have...
Last post
I picked up a new pair of Dunlop Elite's online from Dennis Kirk for $276 delivered UPS ground. I'm mounting them myself.
I went to my local bike shop that stocks Kuryakyn. We tried every one in the book, but none fit. I'm 6'5 and am a little cramped on the pegs. Also,...
Last post
I tried something a couple days ago that helped in the legroom area. The bitch seat is adjustable as well as the trunk. I moved the trunk back as far...
The 416's can be re-built (seals can be replaced), but you will need to monitor/add air periodically; I believe most of us want to avoid the hassles...
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
