Fuel filter...again!!
Moderators: the2knights, Highway Rider
-
lucky13
- Cruiser
- Posts: 45
- Joined: Sun Mar 15, 2020 7:09 pm
- 4
- Current bike(s): 1999 Kawasaki Voyager 1200
- Has liked: 3 times
- Been liked: 8 times
Fuel filter...again!!
I know this subject has been broached already on here, but can someone please help me out, being a new guy with the 1200 Voyager. I read on here that changing the fuel filter can be done by removing the coolant reservoir. Sounded great, but after removing the bracket and stuff, tried to pull out the reservoir and it only moved about 4 mm (lets say a quarter inch). Probably more accurate anyway. Couldn't get it out any further. What am I missing?
-
cushman eagle
- King of the Road
- Posts: 1982
- Joined: Sat Jan 22, 2011 10:08 pm
- 13
- Current bike(s): '99 Kawasaki Voyager 1200
1958 Cushman Eagle restoration has been finished,and have put 3030 miles on her! - Location: Orrville,Ohio
- Has liked: 852 times
- Been liked: 290 times
Re: Fuel filter...again!!
The top of the reservoir clips in a rubber grommet,you will need to gently wiggle it out,then when you reinstall it dab some silicon lube on it to make it easier to remove again.The same applies to the side panels.
'99 Voyager VXII,'58 Cushman Eagle