what is the most common cause and fix of the dreaded front wheel wobble? it only happens at slow speeds (about 35, decelerating) and no hands on the...
Last post
My 1990 XII had the wobble, and steering stem bearing adjustment fixed the problem. I can now ride with one hand and it tracks like it's on rails....
Talking to Metzeler because I didn't see the 1200 Voyager listed in their fitment guide.
I sent them the sizes we use.
They replied saying they no...
Last post
I just bought a front 888 and a 880 for the rear. It was my understanding that they were trying to sell out the stock of the 880 for the rear before...
I'm starting a new thread because it's just too much drama for the first one.
The XII is new to me, and it's never really run right. I did a lot of...
Last post
Yeah, I've been looking at that. But I only have misfire on #3, which is very new. Just a week ago, it missed intermittently under load; but all four...
I pulled the handlebars to re-torque the steering head bearing per Don's video and now the cruise control stopped working. I also had the fairing off...
Last post
Just got back from my ride in Wisconsin this past week and may have found another piece of the puzzle. My auto cancel on the turn signals quit...
Anybody have a set of these lying around? Perhaps removed for easier access to highway pegs or something like that?
'Twas a bit chilly on the way to...
Last post
I don't plan to paint the trim pieces I bought until spring so they can take their time with mine. I just wonder if they really aren't available and...
I recently upgraded to the progressive front springs on my 87 1200. The change made the front end really harsh over even the smallest bumps. It used...
Last post
My cousin came over and lent a hand. We Put new plugs and boots on her, pulled the carbs and cleaned them nicely, and new fuel filter, had to make a...
Hi, I've check the IC Ignitor resistances against those listed in the manual that is posted on the site (Page 15-18). I get different resistances on...
Last post
Tried doing resistance check of ignitor a few years back with Pete Franchi. Could test most pins but it seems that there were a few that needed a...
So I finally finished that paint job I posted about way back when. It took about 80 hours of epoxy/glass cloth to get all 29 pieces of my spare 1993...
Last post
Yeah, I'm not into Rat, but I did want to get rid of everything I didn't want. As an example, I couldn't see the point of carting a radio around if I...
Started getting coolant flowing out of this little port.
I hope this image shows up. Might anyone have an idea
On what's causing this?
Last post
As it turned out, was exactly as you stated, Doug.
Was the RH coolant hose, leaking down, under high pressure, to the sparkplug reservoir.
As some of...
I realize that this may be a totally dumb question but...... How do I change out the rear speakers? I have the Pioneer 4 inch ready to slot in and I...
Last post
Don't feel bad guys. this is a common problem. You are not the first to try to remove those screws and mess them up. Ask me how I know!
My 1/4 coil (21121-1142) is toast, and I can't find one anywhere -- just used on EBay. All sources (I called like 30) are back-ordered from the...
Last post
I guess it's the burned in part. I think my bad one is a little too burned in: short in the primary winding.
I'm buying a used one from Carl Leo. At...
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
