I have a weatherproof SP-ST switch to defeat the starter solenoid. And I have the solenoid plug in hand. It has a black/white wire and a black/yellow...
Last post
Just for posterity, putting the switch in black/yellow works.
My CB seems to function, op panel lights, channels selection work, volume, X mitt key interrupts radio,
but I can't receive or transmit. A friend and...
I'm finally getting the cleaned carbs back together, after waiting forever for parts. Mine were filthy and had several broken or rotten plastic bits....
Last post
Continued thanks.
Know a good Canuck source for those head plates?
I wonder if the airbox is ABS like the plastics. I've been really pleased with how...
Need some ideas as to the best place to buy a set of new hoses, Finally got to hear the bike run for the first time since I bought it and as I let it...
Last post
I'm curious, was the hose to the reservoir blocked or pinched shut? Has it been ok since the repair? I'm asking because a similar thing happened to...
I am looking to replace all the radiator hoses on my 1998 Voyager Xii with 76,000 miles. I believe the one on the bike are probably the originals and...
Last post
+ 1 ... Soooo sad it wasn't carried forward with fuel injection and modernized....
I agree! If they could have put the Connie 1400, smoothed out...
Hi all
I love these bikes and have finally decided to make the plunge. I live in Portland OR so lots of great places to go cruising.
I saw this ad...
Last post
Glad your radio is working and the fork seals attended to.
Don't hesitate to change the front wheel bearings if you suspect they are loose or getting...
Is there an OEM part number for the plastic piece that holds the cb connectors or the air suspension fill valves on the cowling lowers, where they...
Last post
When one lifts the cover blank for the CB channel tuner and display, there is an empty square hole. Since I don't have the CB, I wired in a cigarette...
Howdy all, how important is the little filter in the vacuum advance line? Mine broke and to keep going I put a vacuum tee fitting and capped the open...
Last post
I think the terminology goes back to the days of pneumatic HVAC (heating, ventilation, air conditioning) controls. I haven't pulled mine, so can't...
Anyone here ever used a motorcycle consignment shop to sell a bike? I have a 2000 Voyager XII at my son's house in Colorado Springs. My son is being...
Have you guys with the Markland backrests had any complaints from the passengers about the bar assembly (the chrome bars that come off the sides, and...
Last post
Utopia back rest for sure no complaints :woohoo: :woohoo: :wnk2: :wnk2: :thmup:
I am relatively new to the forum but have learned many things from reading the great posts. I bought a 1998 Kawasaki Voyager Xii last summer...
Last post
I guess I should have done additional homework before deciding to cut them off and replace them. With that said I do like the choice of grips that I...
I been trying to get a hold of someone to get dimensions for a 1200 hitch . I would like to make one before the rally. I can't get anyone to respond...
Last post
check out this link, I made one of these and it works great.
Does it matter which way the fuel hoses go onto the pump? I can't find an inlet stamp on the new pump I purchased (or the old pump), and I wasn't...
Last post
I couldn't remember for sure, and was toooo lazy to go downstairs to the garage to actually look at mine. So I looked up fuel pumps on ebay and there...
Picked up a couple 18 Watt Cree LED lights and mounted them on the front crash bars. They really work well and are a little bright for night time use...
Last post
Picked up a couple 18 Watt Cree LED lights and mounted them on the front crash bars. They really work well and are a little bright for night time use...
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
