Is there Anyone who can help me please
I am seeking for the connection wiring on the 5Polige Connector where you can connect your headset
I don't know where thewire connection for hearing and speaking, can anybody please give me the colorcode and the numbers where to solder the wires on the 5polige connector
Thank you in advance
Peter From de Netherlands ( Holland) So yes i'm a dutchman
Headset Pin out
Moderators: the2knights, Highway Rider
-
Scott-(Altoona, PA)
- King of the Road
- Posts: 1086
- Joined: Mon Feb 18, 2008 1:22 pm
- 16
- Current bike(s): 2001 Voyager XII
- Location: Altoona, PA
- Has liked: 83 times
- Been liked: 140 times
- Contact:
Re: Connection for Headset
Welcome Peter,
You can use the original wire to connect a headset to your helmet. It is called a "Y" cable and you can get it from Carl Leo. Just click HERE to get his information.
It connects to the back of the radio and has two ends on it, one for driver/front and one for passenger/back.
This will save you from having to solder wires and follow color codes.
Others - Peter might need the color codes to fix/adjust a current set up so if you have the configuration available please post it as another option for him.
You can use the original wire to connect a headset to your helmet. It is called a "Y" cable and you can get it from Carl Leo. Just click HERE to get his information.
It connects to the back of the radio and has two ends on it, one for driver/front and one for passenger/back.
This will save you from having to solder wires and follow color codes.
Others - Peter might need the color codes to fix/adjust a current set up so if you have the configuration available please post it as another option for him.
Mid-Atlantic Voyagers chapter secretary {"scribe"}
2001 Voyager XII
We may not know them all, but we owe them all! Thank a Veteran today!
2001 Voyager XII
We may not know them all, but we owe them all! Thank a Veteran today!
-
richardb, austin
- Traveler
- Posts: 164
- Joined: Mon Feb 18, 2008 1:58 pm
- 16
- Current bike(s): '94 Voyager as of 02/10
- Location: Austin, Tx
- Has liked: 0
- Been liked: 0
Re: Connection for Headset
I don't have color codes but I do have this from the forum from 2006 from Byron to Jon. I have not confirmed this pinout YMMV.:
Jon
At the radio its a 6 pin din ,and the helmets use a 5 pin din.
With the 6 pin female, the groove on the bottom, #1 is on the left #5 is on the right. The # 6 is the center pin.
6 pin #1 R.H speaker +
#2 L.H speaker +
#3 Speaker ground
#4 Mic ground
#5 mic/pass +
#6 Mic/driver +
5pin #1 mic +
#2 mic -
#3 speaker -
#4 speaker right +
#5 speaker left +
hope this helps
Byron
Jon
At the radio its a 6 pin din ,and the helmets use a 5 pin din.
With the 6 pin female, the groove on the bottom, #1 is on the left #5 is on the right. The # 6 is the center pin.
6 pin #1 R.H speaker +
#2 L.H speaker +
#3 Speaker ground
#4 Mic ground
#5 mic/pass +
#6 Mic/driver +
5pin #1 mic +
#2 mic -
#3 speaker -
#4 speaker right +
#5 speaker left +
hope this helps
Byron
richardb, austin
__________________
"If you understand what you're doing, you're not learning anything." -- Abraham Lincoln (probably spoken to a DIY Voyager mechanic)
__________________
"If you understand what you're doing, you're not learning anything." -- Abraham Lincoln (probably spoken to a DIY Voyager mechanic)