new darksider on the road
Moderators: the2knights, Highway Rider
-
- Streetster
- Posts: 18
- Joined: Sun Aug 28, 2011 1:06 am
- 13
- Current bike(s): 91 Kaw Voyager
81 Kaw GPZ 1100
71 Kaw 350 Avenger
83 Honda CX650C - Location: Sioux City, Iowa
- Has liked: 0
- Been liked: 0
new darksider on the road
Hi guys!!
I posted a while back that i had bought a Nexen C/T that i was going to put on myXII. i had the tire installed on the rim last week.. finally found some moly 60 grease at the local Honda dealership. I thourghly greased the drive splinesa and pulled the gear unit and greased the shaft splines also. I installed a new set of brake pads and reinstalled the rear wheel. It wasnt a bad job, just alot of bolts to get the rear back on the bike... I took it out today on it's maiden voyage.. about 30 miles. The 1st thing i noticed is that u dont have to force it into a turn, a lil body english and a gentle push and it glides right into the turn :).. It runs alot quieter than the worn EII that was on previously. The C/T soaked up the rough joints in the pavement way better than the bike tire ever did! Cornering seems very stable with 1 or 2 people on the bike. I did notice one thing, on rain grooves the frt tire semms to track the grooves and the C/t doesnt... not a bad thing .. but noticeable. I have a new E3 that i need to get mounted on the front, that may help that issue. I also have new prog front springs and seals to install this week. I figure i may as well just finish it all off so i ordered a set of Prog 412 hd shocks for the rear... the rear shocks have lost alot of its dampening.. wallows in the corners a bit too much for my liking. We are taking off around the 1st of Sept for a trip to Glacier Natl Park... hopefully it will be in tip top shape for the trip! Ride Safe ... Mike
I posted a while back that i had bought a Nexen C/T that i was going to put on myXII. i had the tire installed on the rim last week.. finally found some moly 60 grease at the local Honda dealership. I thourghly greased the drive splinesa and pulled the gear unit and greased the shaft splines also. I installed a new set of brake pads and reinstalled the rear wheel. It wasnt a bad job, just alot of bolts to get the rear back on the bike... I took it out today on it's maiden voyage.. about 30 miles. The 1st thing i noticed is that u dont have to force it into a turn, a lil body english and a gentle push and it glides right into the turn :).. It runs alot quieter than the worn EII that was on previously. The C/T soaked up the rough joints in the pavement way better than the bike tire ever did! Cornering seems very stable with 1 or 2 people on the bike. I did notice one thing, on rain grooves the frt tire semms to track the grooves and the C/t doesnt... not a bad thing .. but noticeable. I have a new E3 that i need to get mounted on the front, that may help that issue. I also have new prog front springs and seals to install this week. I figure i may as well just finish it all off so i ordered a set of Prog 412 hd shocks for the rear... the rear shocks have lost alot of its dampening.. wallows in the corners a bit too much for my liking. We are taking off around the 1st of Sept for a trip to Glacier Natl Park... hopefully it will be in tip top shape for the trip! Ride Safe ... Mike
- debron
- Past Board Member
- Posts: 1087
- Joined: Mon Aug 23, 2010 5:54 pm
- 14
- Current bike(s): 1995 Voyager XII
- Location: Stayton, Oregon (Close to)
- Has liked: 0
- Been liked: 1 time
Re: new darksider on the road
Thanks for the report, Mike!
Ron in Oregon
AVA Webmaster ("master" is optimistic!)
AVA Board Member
1995 Voyager XII
AVA Webmaster ("master" is optimistic!)
AVA Board Member
1995 Voyager XII
-
- Streetster
- Posts: 18
- Joined: Sun Aug 28, 2011 1:06 am
- 13
- Current bike(s): 91 Kaw Voyager
81 Kaw GPZ 1100
71 Kaw 350 Avenger
83 Honda CX650C - Location: Sioux City, Iowa
- Has liked: 0
- Been liked: 0
Re: new darksider on the road
Hi guys
i'd still like to hear from any of you that have pulled a trailer with a car tire... any feedback would be great!!
i'd still like to hear from any of you that have pulled a trailer with a car tire... any feedback would be great!!
- CarbJetKits
- Newbie
- Posts: 6
- Joined: Mon Jul 16, 2012 6:35 pm
- 12
- Current bike(s): Voyager XII 2000
- Location: Florida
- Has liked: 0
- Been liked: 0
- Contact:
Re: new darksider on the road
Hi Mike,
How hard was it to get the MT off and the CT on?
I am in the process of going dark on my triked Xii
How hard was it to get the MT off and the CT on?
I am in the process of going dark on my triked Xii
-
- Streetster
- Posts: 18
- Joined: Sun Aug 28, 2011 1:06 am
- 13
- Current bike(s): 91 Kaw Voyager
81 Kaw GPZ 1100
71 Kaw 350 Avenger
83 Honda CX650C - Location: Sioux City, Iowa
- Has liked: 0
- Been liked: 0
Re: new darksider on the road
i have a good friend that owns a bike repair that owed me a favor... he said it was a piece of cake seated on the rim w/o too much pressure
- gearheadfla
- Grand Tourer
- Posts: 563
- Joined: Sat Jan 08, 2011 5:29 pm
- 13
- Current bike(s): 1988 Voyager XII
1989 Voyager XII
2001 Voyager XII
2007 Vulcan Nomad
2006 Honda Rebel - Location: Port Saint Lucie, Florida
- Has liked: 0
- Been liked: 2 times
Re: new darksider on the road
You say that you feel like now you don't have to force it into a turn. The best way I can think of it is that it feels like it is on a rail now, do you agree? I've got about 1500 miles on it now and still love it, don't even cross my mind anymore, I just stick it in the turns and ride.
Jim in Fl. 88 XII
89 XII-parts bike-scraped
01 XII-sold
07 Vulcan Nomad
Patriot Guard Rider, Florida.
Sunshine State Voyagers
Veterans Nation Riding Association
89 XII-parts bike-scraped
01 XII-sold
07 Vulcan Nomad
Patriot Guard Rider, Florida.
Sunshine State Voyagers
Veterans Nation Riding Association
-
- Streetster
- Posts: 18
- Joined: Sun Aug 28, 2011 1:06 am
- 13
- Current bike(s): 91 Kaw Voyager
81 Kaw GPZ 1100
71 Kaw 350 Avenger
83 Honda CX650C - Location: Sioux City, Iowa
- Has liked: 0
- Been liked: 0
Re: new darksider on the road
it definately feels differant starting a turn... it's not that i had to force it before, it is just easier now.. differant u agree?
- gearheadfla
- Grand Tourer
- Posts: 563
- Joined: Sat Jan 08, 2011 5:29 pm
- 13
- Current bike(s): 1988 Voyager XII
1989 Voyager XII
2001 Voyager XII
2007 Vulcan Nomad
2006 Honda Rebel - Location: Port Saint Lucie, Florida
- Has liked: 0
- Been liked: 2 times
Re: new darksider on the road
100%bikermike wrote:it definately feels differant starting a turn... it's not that i had to force it before, it is just easier now.. differant u agree?
Jim in Fl. 88 XII
89 XII-parts bike-scraped
01 XII-sold
07 Vulcan Nomad
Patriot Guard Rider, Florida.
Sunshine State Voyagers
Veterans Nation Riding Association
89 XII-parts bike-scraped
01 XII-sold
07 Vulcan Nomad
Patriot Guard Rider, Florida.
Sunshine State Voyagers
Veterans Nation Riding Association
-
- Cruiser
- Posts: 55
- Joined: Fri Apr 15, 2011 9:32 am
- 13
- Current bike(s): 2002 Kawasaki Voyager XII
2002 Honda Shadow A.C.E
2002 Honda VTX 1300
2000 1100 V-Star Classic
1983 Honda V-65 Magna - Location: Salisbury,Ma
- Has liked: 0
- Been liked: 0
Re: new darksider on the road
it just feels better, more solid...
I have shaved more metal off my pegs with the CT, then I ever did with the MC..
Glad to see you are enjoying your CT.. I will soon be hitting 10k on mine and I plan on giving a review with pictures of the tire before and after..
I have shaved more metal off my pegs with the CT, then I ever did with the MC..
Glad to see you are enjoying your CT.. I will soon be hitting 10k on mine and I plan on giving a review with pictures of the tire before and after..