Just tore down the top end of my 86 XII due to loss of compression in #1 cylinder. Looks like carbon caused issues with the exhaust valves. So a valve job is in order. Cylinders and rings okay. carbon build up on top of #1 piston. My question is about the oversize kit. If anyone has any experience with it? Is it worth it, etc? I'm thinking about going that route, may have to go with a sidecar set up due to a shoulder injury.
Your thoughts???http://www.amervoyassoc.org/forum/posti ... e=post&f=2#
Voyager XII engine rebuild
Moderators: the2knights, Highway Rider
-
davidl
- Traveler
- Posts: 136
- Joined: Fri Oct 24, 2008 2:32 am
- 16
- Current bike(s): 2000 Voyager XII
- Location: Marlin, Tx
- Has liked: 0
- Been liked: 1 time
Re: Voyager XII engine rebuild
If you haven't already, you first call or email should be to Carl Leo. Probably knows more about the XII than anyone. He is a great source of information & is willing to help anyone. Good luck..
-
cushman eagle
- King of the Road
- Posts: 1982
- Joined: Sat Jan 22, 2011 10:08 pm
- 13
- Current bike(s): '99 Kawasaki Voyager 1200
1958 Cushman Eagle restoration has been finished,and have put 3030 miles on her! - Location: Orrville,Ohio
- Has liked: 854 times
- Been liked: 290 times
Re: Voyager XII engine rebuild
You might also look into why #1 carboned up, such as too rich a mixture on that cylinder,and why 
'99 Voyager VXII,'58 Cushman Eagle