November 14, 2013
I need parts for 84 Voyager 1300 6 cyl. Fuel injected.
Fuel pump
Fuel regulator
Boost sensor
Fuel inj. Computer
May consider a wrecked bike!
Beautiful bike: many mods, runs, but not good, will sent pics.
email: rickthecruzer@gmail.com or call 405-650-2253
Thanks for any help I can get.
Looking for parts
Moderators: the2knights, Highway Rider
- Me Again
- King of the Road
- Posts: 1808
- Joined: Sun Feb 24, 2008 4:27 am
- 17
- Current bike(s): 1988 1300 Voyager
- Location: Wisconsin
- Has liked: 0
- Been liked: 269 times
Re: Looking for parts
Try this link.
http://groups.yahoo.com/neo/groups/1300Voyager/info
This site has more knowledge of the 1300 Voyager than any other I know of.
If is starts and runs ,you probably don't need the computer .Check the valves first (compression)
If it has been sitting ,it will need a complete fuel system cleaning .Sometimes as simple as a can of injector cleaner.
Most of the parts are out there ,just a matter of getting someone into giving them up.
Congratulations on the bike, hope you get it running
http://groups.yahoo.com/neo/groups/1300Voyager/info
This site has more knowledge of the 1300 Voyager than any other I know of.
If is starts and runs ,you probably don't need the computer .Check the valves first (compression)
If it has been sitting ,it will need a complete fuel system cleaning .Sometimes as simple as a can of injector cleaner.
Most of the parts are out there ,just a matter of getting someone into giving them up.
Congratulations on the bike, hope you get it running
- Me Again
- King of the Road
- Posts: 1808
- Joined: Sun Feb 24, 2008 4:27 am
- 17
- Current bike(s): 1988 1300 Voyager
- Location: Wisconsin
- Has liked: 0
- Been liked: 269 times
Re: Looking for parts
Parts are easy to find .The trick is to convince their present guardian to give them up.voyager55 wrote:1300 parts are hard to find. Ebay & junk yards best bet
I believe there are a couple either parting out their bikes or selling a complete parts bike on the Yahoo site.
- Bruce in OK
- Traveler
- Posts: 221
- Joined: Mon Feb 18, 2008 1:21 pm
- 17
- Current bike(s): '01 VXII
'06 Vespa GTS 250
'02 Honda Elite 80
'99 Honda CB 250 Nighthawk - Location: Enid, OK
- Has liked: 0
- Been liked: 2 times
Re: Looking for parts
After a while, another problem crops up. All the parts wear in the same places. The part you may buy could be past it's wear tolerances as well. Wiring tends to get brittle in time as well.
Bruce in OK
'01 VXII; '99 Honda CB 250 Nighthawk
'01 VXII; '99 Honda CB 250 Nighthawk