Looking for parts

For general motorcycle related use, news, and observations.

Moderators: the2knights, Highway Rider

Post Reply
robrewer
Newbie
Newbie
Posts: 1
Joined: Tue Nov 12, 2013 8:04 pm
11
Current bike(s): 1984 Voyager
Has liked: 0
Been liked: 0

Looking for parts

Post by robrewer »

November 14, 2013

I need parts for 84 Voyager 1300 6 cyl. Fuel injected.

Fuel pump
Fuel regulator
Boost sensor
Fuel inj. Computer
May consider a wrecked bike!
Beautiful bike: many mods, runs, but not good, will sent pics.
email: rickthecruzer@gmail.com or call 405-650-2253

Thanks for any help I can get.
User avatar
Me Again
King of the Road
King of the Road
Posts: 1808
Joined: Sun Feb 24, 2008 4:27 am
17
Current bike(s): 1988 1300 Voyager
Location: Wisconsin
Has liked: 0
Been liked: 269 times

Re: Looking for parts

Post by Me Again »

Try this link.
http://groups.yahoo.com/neo/groups/1300Voyager/info
This site has more knowledge of the 1300 Voyager than any other I know of.
If is starts and runs ,you probably don't need the computer .Check the valves first (compression)
If it has been sitting ,it will need a complete fuel system cleaning .Sometimes as simple as a can of injector cleaner.
Most of the parts are out there ,just a matter of getting someone into giving them up.
Congratulations on the bike, hope you get it running
voyager55
Elite Tourer
Elite Tourer
Posts: 820
Joined: Mon Aug 19, 2013 6:08 am
11
Current bike(s): 2003 1200
Location: Eden Prairie, MN
Has liked: 1 time
Been liked: 3 times

Re: Looking for parts

Post by voyager55 »

1300 parts are hard to find. Ebay & junk yards best bet
User avatar
Me Again
King of the Road
King of the Road
Posts: 1808
Joined: Sun Feb 24, 2008 4:27 am
17
Current bike(s): 1988 1300 Voyager
Location: Wisconsin
Has liked: 0
Been liked: 269 times

Re: Looking for parts

Post by Me Again »

voyager55 wrote:1300 parts are hard to find. Ebay & junk yards best bet
Parts are easy to find .The trick is to convince their present guardian to give them up.
I believe there are a couple either parting out their bikes or selling a complete parts bike on the Yahoo site.
User avatar
Bruce in OK
Traveler
Traveler
Posts: 221
Joined: Mon Feb 18, 2008 1:21 pm
17
Current bike(s): '01 VXII
'06 Vespa GTS 250
'02 Honda Elite 80
'99 Honda CB 250 Nighthawk
Location: Enid, OK
Has liked: 0
Been liked: 2 times

Re: Looking for parts

Post by Bruce in OK »

After a while, another problem crops up. All the parts wear in the same places. The part you may buy could be past it's wear tolerances as well. Wiring tends to get brittle in time as well.
Bruce in OK
'01 VXII; '99 Honda CB 250 Nighthawk
Post Reply

Return to “General Chat”