how to videos 4 sale

This is for general posts and questions concerning only the Voyager XII (1200cc, Four-cylinder) Years 1986 thru 2003.

Moderators: the2knights, Highway Rider

Post Reply
User avatar
dogzz
Streetster
Streetster
Posts: 20
Joined: Mon Feb 08, 2010 2:30 am
14
Current bike(s): 1980 GS1000 G
1986 Voyager XII
Location: long island NY
Has liked: 0
Been liked: 0

how to videos 4 sale

Post by dogzz »

Is there still videos for sale on front forks? I cant find them & would like to have one when i redo my forks
Thanks
Vinny
User avatar
debron
Past Board Member
Past Board Member
Posts: 1087
Joined: Mon Aug 23, 2010 5:54 pm
14
Current bike(s): 1995 Voyager XII
Location: Stayton, Oregon (Close to)
Has liked: 0
Been liked: 1 time

Re: how to videos 4 sale

Post by debron »

If nothing else, do a Google search on "how to install progressive fork springs" and you will find a number of videos and documents on the process on various bikes. Forks are somewhat generic to a large extent, I think.
Ron in Oregon
AVA Webmaster ("master" is optimistic!)
AVA Board Member
1995 Voyager XII
Image
Tat2demon
Traveler
Traveler
Posts: 152
Joined: Fri Nov 08, 2013 4:46 am
11
Current bike(s): 78 Yamaha XS 1100
81 Yamaha XJ650
88 Kawasaki Voyager XII
Location: Sioux Falls, SD
Has liked: 0
Been liked: 0

Re: how to videos 4 sale

Post by Tat2demon »

Nate

78 Yamaha XS 1100
81 Yamaha XJ650
88 Kawasaki Voyager XII

Image
User avatar
jre258 in SoDak
Cruiser
Cruiser
Posts: 92
Joined: Mon Feb 18, 2008 1:59 pm
16
Current bike(s): 1990 XII Voyager
Location: South Dakota
Has liked: 0
Been liked: 0
Contact:

Re: how to videos 4 sale

Post by jre258 in SoDak »

Nate, I found that the tool used to remove faucet handles, with a little modification, works great to push down the top plug so that you can remove or install the retainer ring.
Jim
The cager waving at you might just be a frustrated, fellow biker.
Tat2demon
Traveler
Traveler
Posts: 152
Joined: Fri Nov 08, 2013 4:46 am
11
Current bike(s): 78 Yamaha XS 1100
81 Yamaha XJ650
88 Kawasaki Voyager XII
Location: Sioux Falls, SD
Has liked: 0
Been liked: 0

Re: how to videos 4 sale

Post by Tat2demon »

I actually ended up putting a 3/4" socket on the plug and ran a ratchet strap top to bottom and tightened it down. That was after trying to force it for about an hour by hand. Could get the spring compressed but couldnt hold it long enough to get a pick in there to get the ring out. Tried so hard and so long that even after a week I have still have bruises on my palms from the center hole of the socket. Looks like I have stigmata.
Nate

78 Yamaha XS 1100
81 Yamaha XJ650
88 Kawasaki Voyager XII

Image
Tat2demon
Traveler
Traveler
Posts: 152
Joined: Fri Nov 08, 2013 4:46 am
11
Current bike(s): 78 Yamaha XS 1100
81 Yamaha XJ650
88 Kawasaki Voyager XII
Location: Sioux Falls, SD
Has liked: 0
Been liked: 0

Re: how to videos 4 sale

Post by Tat2demon »

Oh and Carl says he does his while still on the bike. Can put a socket on the cap and use some kind of lever to go under the handlebars. Sounds like a great idea.
Nate

78 Yamaha XS 1100
81 Yamaha XJ650
88 Kawasaki Voyager XII

Image
User avatar
doug of so fla
Grand Tourer
Grand Tourer
Posts: 431
Joined: Tue Feb 19, 2008 6:17 pm
16
Current bike(s): 07 gold wing
Location: summerfield, fl
Has liked: 0
Been liked: 1 time

Re: how to videos 4 sale

Post by doug of so fla »

I stand on the footpegs and use a large phillps screw driver & push down and the wife picks the spring out. Those xtra hands on a XII or any MC make the job much easier. :LvStrk
doug of no fla
User avatar
debron
Past Board Member
Past Board Member
Posts: 1087
Joined: Mon Aug 23, 2010 5:54 pm
14
Current bike(s): 1995 Voyager XII
Location: Stayton, Oregon (Close to)
Has liked: 0
Been liked: 1 time

Re: how to videos 4 sale

Post by debron »

Don Medina made a nifty little device, a triangular shape out of aluminum (???). Drilled two holes that allow it to be bolted to the forward handlebar clamp bolts, a third threaded hole positioned over the fork. Then he just screws a bolt through the threaded hole that pushes down and holds the fork spring. To do the other fork, just flip the device over.
Ron in Oregon
AVA Webmaster ("master" is optimistic!)
AVA Board Member
1995 Voyager XII
Image
voyager55
Elite Tourer
Elite Tourer
Posts: 820
Joined: Mon Aug 19, 2013 6:08 am
11
Current bike(s): 2003 1200
Location: Eden Prairie, MN
Has liked: 1 time
Been liked: 3 times

Re: how to videos 4 sale

Post by voyager55 »

User avatar
dogzz
Streetster
Streetster
Posts: 20
Joined: Mon Feb 08, 2010 2:30 am
14
Current bike(s): 1980 GS1000 G
1986 Voyager XII
Location: long island NY
Has liked: 0
Been liked: 0

Re: how to videos 4 sale

Post by dogzz »

WOW guys great advice ! Thanks a bunch Im just a lil nervous taking the girl apart :pray: . I'll be doing new fork seals & progressive springs (back was done last year).Cant wait till spring comes in so I can enjoy the upgrade :thmup:
Thanks again
Vinny
Post Reply

Return to “General - Voyager XII (1200 Four)”