Hello & Introduction

Post by **Seawolf** » Fri Aug 08, 2014 12:33 pm

Hi my name is John Dyck, I hail from the far north (Stony Plain, Alberta). I ride a 2013 Pearl white 1700 Voyager. Bought last August and now have 20,000 kms. on it. Love the bike except for the belt noise. Rode my 1600 Nomad for 6 years and put 80,000 ams. on it before the trade-in.

Regards,
John

Post by **debron** » Fri Aug 08, 2014 6:57 pm

Welcome John! You found the right place though having only had shaft drive bikes I can't comment on the belt!

Post by **Terros** » Sun Aug 10, 2014 9:29 am

Hello John and welcome from Carbon, AB, just west of Drumheller. Our riding time is a little shorter than most, especially the southern folks, but we have some of the best riding.

I'm hoping to find a white also.
My Sister is in Edmonton and I get up there once in awhile, maybe have a coffee?

Bob

Post by **Seawolf** » Sun Aug 10, 2014 11:58 pm

Thanks for the follow up guys.
Bob anytime your up north be glad to have a coffee. Email is yelnatspuc@gmail.com
Regards
John

Post by **Terros** » Mon Aug 11, 2014 4:10 pm

Thanks John, that's quite a gmail name you have, must stand for something?

Anyway, get up that way couple times a year, but seeing as how we just moved to Carbon could be later this year. Do you ever get to Drumheller and the Dinosaur
Museum? Very interesting place.

Ride safe
Bob

Post by **David (N. Alabama)** » Wed Aug 13, 2014 5:13 pm

Did you check your wheel alignment and the belt tension? They are sometimes set too tight. Loosen it to the loose end of the tolerance and give it a try.

Post by **Seawolf** » Fri Aug 15, 2014 11:08 am

Thanks David
Yes I have loosened and aligned the belt. It sounds like a gear whine??

Post by **Seawolf** » Tue Aug 19, 2014 9:50 pm

Terros wrote:Thanks John, that's quite a gmail name you have, must stand for something?

Anyway, get up that way couple times a year, but seeing as how we just moved to Carbon could be later this year. Do you ever get to Drumheller and the Dinosaur
Museum? Very interesting place.

Ride safe
Bob

Hello Bob
A group of us are supposed to be in Drumheller this weekend on the 23rd. Leaving Edmonton @ 0830 and taking the backroads. Not sure of the exact time in Drumheller but would be happy to meet up with you if your around. PM to the crazy email address...think Stanley Cup

John

Post by **Terros** » Fri Aug 22, 2014 11:04 am

It figures

, my sister is coming in from Edmonton today and will be here a week or so. Sorry to miss you.
Bob

Post by **Bronson** » Sat Aug 23, 2014 8:36 pm

Hi John!
I have a 2009 and the belt had a whine that was
noticeable at low speeds. Now some of my friends
got a 2013 and 2014 with the same whine. The problems
is that they set the belt to tight at the factory. All
you need to do is loosen it a little. Or wait till the belts
streaches after a few thousand miles or when you have the
tire changed.

Post by **Jim49az** » Wed Sep 09, 2015 9:32 pm

Im Jim, from Mesa AZ, im 54. I just picked up my first Voyager, a used 2009 1700 with 7500 miles on it. It is a beautiful bike, sterring seems heavy and stiff though. I would like to pick up a OEM shop manual and parts book for it

American Voyager Association

Hello & Introduction

Hello & Introduction

Re: Hello & Introduction

Re: Hello & Introduction

Re: Hello & Introduction

Re: Hello & Introduction

Re: Hello & Introduction

Re: Hello & Introduction

Re: Hello & Introduction

Re: Hello & Introduction

Re: Hello & Introduction

Re: Hello & Introduction