Hey y'all!
Quiet little forum you've got here! Any chance someone has a technical drawing of the steering stem for one of these beasts? If not, diameters at the triple clamp interfaces would be helpful as well. If you've got a spare stem sitting on your bench and don't mind measuring it, it would be greatly appreciated.
Thanks in advance!
Nick
Steering Stem
Moderators: the2knights, Highway Rider
-
debron
- Past Board Member
- Posts: 1087
- Joined: Mon Aug 23, 2010 5:54 pm
- 14
- Current bike(s): 1995 Voyager XII
- Location: Stayton, Oregon (Close to)
- Has liked: 0
- Been liked: 1 time
Re: Steering Stem
Maybe this is what you are looking for? The Service Manual is the most technical we have available:
https://onedrive.live.com/view.aspx?cid ... pp=WordPdf
(Thanks MR Jensee!)
Where in Oregon are you, Nick?
https://onedrive.live.com/view.aspx?cid ... pp=WordPdf
(Thanks MR Jensee!)
Where in Oregon are you, Nick?
Ron in Oregon
AVA Webmaster ("master" is optimistic!)
AVA Board Member
1995 Voyager XII
AVA Webmaster ("master" is optimistic!)
AVA Board Member
1995 Voyager XII
-
nick5446
- Newbie
- Posts: 3
- Joined: Wed Oct 08, 2014 11:13 pm
- 10
- Location: Portland, Oregon
- Has liked: 0
- Been liked: 0
Re: Steering Stem
Not quite, although that is useful, thanks!
Ideally I'm looking for something like this: http://i5.photobucket.com/albums/y189/k ... dified.jpg
I'm doing a front end swap on my bike and it would be good to know before I start. Otherwise I can just take it apart and measure it.
I'm in Portland. Just got the Voyager and going to be building a street fighter out of it.
Ideally I'm looking for something like this: http://i5.photobucket.com/albums/y189/k ... dified.jpg
I'm doing a front end swap on my bike and it would be good to know before I start. Otherwise I can just take it apart and measure it.
I'm in Portland. Just got the Voyager and going to be building a street fighter out of it.
-
debron
- Past Board Member
- Posts: 1087
- Joined: Mon Aug 23, 2010 5:54 pm
- 14
- Current bike(s): 1995 Voyager XII
- Location: Stayton, Oregon (Close to)
- Has liked: 0
- Been liked: 1 time
Re: Steering Stem
Oops! Sorry, I gave you the XII manual. I didn't notice this is posted in the 1300 forum!
Ron in Oregon
AVA Webmaster ("master" is optimistic!)
AVA Board Member
1995 Voyager XII
AVA Webmaster ("master" is optimistic!)
AVA Board Member
1995 Voyager XII
-
trikebldr
- Elite Tourer
- Posts: 749
- Joined: Mon Sep 15, 2014 8:34 pm
- 10
- Current bike(s): '82 Kawasaki KZ750 Spectre
'82 Kawasaki KZ1100D Spectre
'84 Kawasaki Voyager 1300 with
'79 Vetter Terraplane sidecar
'85 Kawasaki Voyager 1300
2001 Kawasaki ZG1200 Voyager XII - Location: Independence, MO.
- Has liked: 0
- Been liked: 1 time
Re: Steering Stem
Gettin' old, huh, Ron?
FWIW, Nick, if you can't find the exact info on the stem and bearing sizes, and you would rather know in advance, there are a couple of stems/bearings available on eBay for under $20. A whole stem, bearings and triple tree are only $34. Just do a search for "kawasaki voyager 1300" and you will find thousands of 1300 parts, new and used.
FWIW, Nick, if you can't find the exact info on the stem and bearing sizes, and you would rather know in advance, there are a couple of stems/bearings available on eBay for under $20. A whole stem, bearings and triple tree are only $34. Just do a search for "kawasaki voyager 1300" and you will find thousands of 1300 parts, new and used.
-
debron
- Past Board Member
- Posts: 1087
- Joined: Mon Aug 23, 2010 5:54 pm
- 14
- Current bike(s): 1995 Voyager XII
- Location: Stayton, Oregon (Close to)
- Has liked: 0
- Been liked: 1 time
Re: Steering Stem
...I wasn't goin' to tell......trikebldr wrote:Gettin' old, huh, Ron?
Ron in Oregon
AVA Webmaster ("master" is optimistic!)
AVA Board Member
1995 Voyager XII
AVA Webmaster ("master" is optimistic!)
AVA Board Member
1995 Voyager XII