Looking for final drive info on ANY shaft drive Honda
Moderators: the2knights, Highway Rider
- trikebldr
- Elite Tourer
- Posts: 749
- Joined: Mon Sep 15, 2014 8:34 pm
- 10
- Current bike(s): '82 Kawasaki KZ750 Spectre
'82 Kawasaki KZ1100D Spectre
'84 Kawasaki Voyager 1300 with
'79 Vetter Terraplane sidecar
'85 Kawasaki Voyager 1300
2001 Kawasaki ZG1200 Voyager XII - Location: Independence, MO.
- Has liked: 0
- Been liked: 1 time
Looking for final drive info on ANY shaft drive Honda
Am looking for the final drive ratio on any Honda 4-cyclinder bike. Or, at least the tooth count on the ring and the pinion. Not interested in the overall ratio. just in the final drive housing. It doesn't matter what year.
Thanks!
Thanks!
- Lucasind
- King of the Road
- Posts: 1790
- Joined: Mon Dec 17, 2012 5:44 pm
- 11
- Current bike(s): 2003 Voyager 1200
1988 Voyager 1200
1985 Voyager 1300
2008 Concourse 1400
1985 LTD 1100
1981 CSR 1000
1981 CSR 650
1979 KZ 650
1973 XL 350
1988 Eliminator
1975 CB 125
1965 S 65
and a bunch of parts ! - Location: Toledo, OH
- Has liked: 194 times
- Been liked: 69 times
Re: Looking for final drive info on ANY shaft drive Honda
I have a couple of goldwings in my stable,and a service manual in the cabinet, I will check the book and see what I can find out about ratios and tooth count after I get home from work, I will get back to you later this afternoon....gotta go work on forklifts,and make some $...... ..........tony
90% OF ANY JOB ...IS GETTING STARTED !
- trikebldr
- Elite Tourer
- Posts: 749
- Joined: Mon Sep 15, 2014 8:34 pm
- 10
- Current bike(s): '82 Kawasaki KZ750 Spectre
'82 Kawasaki KZ1100D Spectre
'84 Kawasaki Voyager 1300 with
'79 Vetter Terraplane sidecar
'85 Kawasaki Voyager 1300
2001 Kawasaki ZG1200 Voyager XII - Location: Independence, MO.
- Has liked: 0
- Been liked: 1 time
Re: Looking for final drive info on ANY shaft drive Honda
My research has turned up that the GL1000 had a 3.44 ratio, the 1200 &1500's had a 2.833, and the 1800's have a 3.09 or 3.10. Anybody able to verify this info before I shell out any cash for a 2.833, it's wheel, driveshaft and swingarm? This all came from various forums, so who knows how accurate the info may be.
- Lucasind
- King of the Road
- Posts: 1790
- Joined: Mon Dec 17, 2012 5:44 pm
- 11
- Current bike(s): 2003 Voyager 1200
1988 Voyager 1200
1985 Voyager 1300
2008 Concourse 1400
1985 LTD 1100
1981 CSR 1000
1981 CSR 650
1979 KZ 650
1973 XL 350
1988 Eliminator
1975 CB 125
1965 S 65
and a bunch of parts ! - Location: Toledo, OH
- Has liked: 194 times
- Been liked: 69 times
Re: Looking for final drive info on ANY shaft drive Honda
Both my wings are 1100 cc.....80' - 83', Sounds like these are not candidates.
90% OF ANY JOB ...IS GETTING STARTED !
- Me Again
- King of the Road
- Posts: 1788
- Joined: Sun Feb 24, 2008 4:27 am
- 16
- Current bike(s): 1988 1300 Voyager
- Location: Wisconsin
- Has liked: 0
- Been liked: 262 times
Re: Looking for final drive info on ANY shaft drive Honda
I can't help much with ratios but remember the 1300 has a much smaller rear tire than most big touring bikes,so make sure you will have enough clearance.
- Lucasind
- King of the Road
- Posts: 1790
- Joined: Mon Dec 17, 2012 5:44 pm
- 11
- Current bike(s): 2003 Voyager 1200
1988 Voyager 1200
1985 Voyager 1300
2008 Concourse 1400
1985 LTD 1100
1981 CSR 1000
1981 CSR 650
1979 KZ 650
1973 XL 350
1988 Eliminator
1975 CB 125
1965 S 65
and a bunch of parts ! - Location: Toledo, OH
- Has liked: 194 times
- Been liked: 69 times
Re: Looking for final drive info on ANY shaft drive Honda
Bill,...my 85' 1300 has a new 140/90/16 Kenda brand tire,installed by P.O. measuring with a tape measure
at about 26" height.x 5.5"width
at about 26" height.x 5.5"width
90% OF ANY JOB ...IS GETTING STARTED !
- trikebldr
- Elite Tourer
- Posts: 749
- Joined: Mon Sep 15, 2014 8:34 pm
- 10
- Current bike(s): '82 Kawasaki KZ750 Spectre
'82 Kawasaki KZ1100D Spectre
'84 Kawasaki Voyager 1300 with
'79 Vetter Terraplane sidecar
'85 Kawasaki Voyager 1300
2001 Kawasaki ZG1200 Voyager XII - Location: Independence, MO.
- Has liked: 0
- Been liked: 1 time
Re: Looking for final drive info on ANY shaft drive Honda
The ZN1300 has the 16" rim, and the KZ1300 has the 17" rim, so if the profile size of a tire is the same for both wheels, then the KZ wheel will give you a slightly larger tire, Tony, which is what you are looking for, too. There is plenty of room under the ZN's fender to clear another 1/2" of radius with the KZ's 17" wheel. A couple of Wing rear wheels were 17", but most were 16", and one Aspencade 1200 even had a 15".
My goal is to come up with a final drive/wheel combo that will give the equivalent to a sixth gear so we don't keep stabbing that shifter looking for one! WITH my sidecar attached I never had that problem, but without it I also kept trying to shift up again.
My goal is to come up with a final drive/wheel combo that will give the equivalent to a sixth gear so we don't keep stabbing that shifter looking for one! WITH my sidecar attached I never had that problem, but without it I also kept trying to shift up again.
- Lucasind
- King of the Road
- Posts: 1790
- Joined: Mon Dec 17, 2012 5:44 pm
- 11
- Current bike(s): 2003 Voyager 1200
1988 Voyager 1200
1985 Voyager 1300
2008 Concourse 1400
1985 LTD 1100
1981 CSR 1000
1981 CSR 650
1979 KZ 650
1973 XL 350
1988 Eliminator
1975 CB 125
1965 S 65
and a bunch of parts ! - Location: Toledo, OH
- Has liked: 194 times
- Been liked: 69 times
- trikebldr
- Elite Tourer
- Posts: 749
- Joined: Mon Sep 15, 2014 8:34 pm
- 10
- Current bike(s): '82 Kawasaki KZ750 Spectre
'82 Kawasaki KZ1100D Spectre
'84 Kawasaki Voyager 1300 with
'79 Vetter Terraplane sidecar
'85 Kawasaki Voyager 1300
2001 Kawasaki ZG1200 Voyager XII - Location: Independence, MO.
- Has liked: 0
- Been liked: 1 time
Re: Looking for final drive info on ANY shaft drive Honda
Thanks, Tony! That's pretty cool! It told me that the front and rear tires are supposed to be the same diameter.
- Lucasind
- King of the Road
- Posts: 1790
- Joined: Mon Dec 17, 2012 5:44 pm
- 11
- Current bike(s): 2003 Voyager 1200
1988 Voyager 1200
1985 Voyager 1300
2008 Concourse 1400
1985 LTD 1100
1981 CSR 1000
1981 CSR 650
1979 KZ 650
1973 XL 350
1988 Eliminator
1975 CB 125
1965 S 65
and a bunch of parts ! - Location: Toledo, OH
- Has liked: 194 times
- Been liked: 69 times