Aftermarket Foot Pegs

[Pbpd183]

I would like to replace/upgrade the current stock Driver's foot pegs on my 2000 XII. Does anybody know of a part that will be a direct replacement, or of a cross reference to another bike that would work? Thank you.

[JimK]

I think this is what your looking for.

http://www.bikebandit.com/oem-parts/199 ... 9#sch71823" onclick="window.open(this.href);return false;

This site has a lot of oem parts. I've ordered from them before and the service was good. I hope this helps.

[Bill O]

I think this is what your looking for.

http://www.bikebandit.com/oem-parts/199 ... 9#sch71823" onclick="window.open(this.href);return false;

This site has a lot of oem parts. I've ordered from them before and the service was good. I hope this helps.

Jimk,
The link you provided shows the stock Voyager 1200 driver and passanget foot boards. The board will not replace the front drivers pegs.

The only direct replacement Driver Floorboards are the Markland Driver Floorboards made specifically for the Voyager 1200. They can still be found but are usually in the $350.00 price range. If I am not mistaken, there is a set on the AVA Classified section.

Bill O


It's still there at $200.00...

[Pbpd183]

Thanks for the input. What I need to know is will an aftermarket footpeg, like show chrome or kuryakyn work as a driver footpeg replacement? Not floorboards, just a different footpeg.

[JimK]

If you use an aftermarket foot peg I believe you will have to fabricate a mounting system for it. If your looking to replace your stock foot pegs the link I provided in the above post shows oem foot pegs you can order.