Muffler Clamp

This is for general posts and questions concerning only the Voyager XII (1200cc, Four-cylinder) Years 1986 thru 2003.

Moderators: the2knights, Highway Rider

Post Reply
User avatar
randallar
Cruiser
Cruiser
Posts: 75
Joined: Fri May 02, 2014 11:48 am
10
Current bike(s): 1994 Kawasaki Voyager XII
Location: Indianapolis,IN
Has liked: 0
Been liked: 0

Muffler Clamp

Post by randallar »

Well I started removing the rear tire, needed to loosen the muffler clamps to get the exhaust down far enough. Of course I broke the bolt on the clamp. The covers were no picnic either but I got the clamp off. My question: part number is 92037-1228, there is a clamp on ebay for a ZN1300 with the same part number, same part? I would think it is, just want to make sure.
User avatar
richardb, austin
Traveler
Traveler
Posts: 164
Joined: Mon Feb 18, 2008 1:58 pm
16
Current bike(s): '94 Voyager as of 02/10
Location: Austin, Tx
Has liked: 0
Been liked: 0

Re: Muffler Clamp

Post by richardb, austin »

Do a google search for that exact pn & see if it comes back to more than one bike. I'll bet that it's the exact same - unless ebay seller typo-ed one or the other. If all that is broken is the actual bolt, I'd think you could replace that with a Home Depot metric bolt.
richardb, austin
__________________
"If you understand what you're doing, you're not learning anything." -- Abraham Lincoln (probably spoken to a DIY Voyager mechanic)
User avatar
randallar
Cruiser
Cruiser
Posts: 75
Joined: Fri May 02, 2014 11:48 am
10
Current bike(s): 1994 Kawasaki Voyager XII
Location: Indianapolis,IN
Has liked: 0
Been liked: 0

Re: Muffler Clamp

Post by randallar »

Yes it came back as the same clamp. The bolt is really in there and I don't have heat to get it out. Just buy another one.
User avatar
Wahrsuul
Traveler
Traveler
Posts: 109
Joined: Mon Sep 15, 2014 12:57 am
10
Current bike(s): 95 Voyager XII
Location: Columbia SC
Has liked: 0
Been liked: 0

Re: Muffler Clamp

Post by Wahrsuul »

I had to cut the clamps off my bike. A PO had ground the bolts so far down and bent the clamps so much, I couldn't get them off any other way.
Post Reply

Return to “General - Voyager XII (1200 Four)”