Mods
Moderators: the2knights, Highway Rider
-
Avidrider62
- Tourer
- Posts: 226
- Joined: Sat Dec 13, 2014 9:12 pm
- 9
- Current bike(s): Bikeless
- Location: Valdosta, GA
- Has liked: 1 time
- Been liked: 3 times
-
Tonyvdb
- Grand Tourer
- Posts: 530
- Joined: Thu May 29, 2014 11:36 pm
- 10
- Current bike(s): 2017 Victory Vision
1996 Voyager (Just sold)
1981 GPZ 550 (Previous bike) - Location: Edmonton, Alberta, Canada
- Has liked: 0
- Been liked: 0
Re: Mods
Let's see, put an updated clarion radio with Bluetooth and mp3player in thanks to Pete. Installed a Utopia drivers backrest and small subwoofer in the trunk. Also replaced the windshield. Haven't ridden yet as still too much gravel on the roads up here from the winter.
2017 Gloss black Victory Vision
1996 Kawasaki Voyager Just sold
1981 Kawasaki GPZ550 (sold)
1996 Kawasaki Voyager Just sold
1981 Kawasaki GPZ550 (sold)
-
Avidrider62
- Tourer
- Posts: 226
- Joined: Sat Dec 13, 2014 9:12 pm
- 9
- Current bike(s): Bikeless
- Location: Valdosta, GA
- Has liked: 1 time
- Been liked: 3 times
Re: Mods
Went boxless, all red lenses along the bottom rear. Rebuilt my clutch slave, new o rings in the coolant tubes, hartco seat enroute My pictures of the mods are on the other Voyager site. http://www.abbikeboard.com/forum/viewto ... f=1&t=4070" onclick="window.open(this.href);return false; and http://www.abbikeboard.com/forum/viewto ... f=1&t=4055" onclick="window.open(this.href);return false;
2003 with 87 colors
-
ekap1200
- Master Fabricator
- Posts: 1364
- Joined: Fri Jul 04, 2008 12:54 pm
- 16
- Current bike(s): 2000 voyager end of year total. 108.634
- Location: Williamstown, New Jersey
- Has liked: 33 times
- Been liked: 134 times
Re: Mods
Not much to report here, I did get some diffusers for the Cree LED's on the front. spreads the beam from the 10deg to a wide angle of 30 on each light.
I have returned to the front fender project and have a workable formed blank. The one I will use for production will have some type of cut-out Logo or design. It will have five fastners , carriage bolt ,
( from the inside out ) and then a stainless steel shallow acorn nut on the outside.
What has been payin the heating bill has been the metal art work I have been doing, this rough work is an old chevy one of 3 that I made from a photo. When PC's work ' their the best thing since two wheels...
The pic of the garmin mount has been shown before I did that in the fall. I have been out of the shop for about two weeks but have been feeling better and put in a few hours tonight. Doesn't seem to be much work needed on the old 1200. Just Basic maintenance
I worked on all that once the roads got salted and sanded at the beginning of winter here in NJ. Just not enough free time for me.. I'll change the oil a few weeks before the rally trip and decide on tires at that point also.
but it needs a good cleaning after a nice 200 mile day. Soon I hope....
A Busy Man is a Happy Man
Gene Kap.
I have returned to the front fender project and have a workable formed blank. The one I will use for production will have some type of cut-out Logo or design. It will have five fastners , carriage bolt ,
( from the inside out ) and then a stainless steel shallow acorn nut on the outside.
What has been payin the heating bill has been the metal art work I have been doing, this rough work is an old chevy one of 3 that I made from a photo. When PC's work ' their the best thing since two wheels...
The pic of the garmin mount has been shown before I did that in the fall. I have been out of the shop for about two weeks but have been feeling better and put in a few hours tonight. Doesn't seem to be much work needed on the old 1200. Just Basic maintenance
I worked on all that once the roads got salted and sanded at the beginning of winter here in NJ. Just not enough free time for me.. I'll change the oil a few weeks before the rally trip and decide on tires at that point also.
but it needs a good cleaning after a nice 200 mile day. Soon I hope.... A Busy Man is a Happy Man
Gene Kap."Its not bad if you don't know something, but when you don't know you don't know; That's when your in trouble". Joe Place 1912-2008 (my grandfather)
-
debron
- Past Board Member
- Posts: 1087
- Joined: Mon Aug 23, 2010 5:54 pm
- 14
- Current bike(s): 1995 Voyager XII
- Location: Stayton, Oregon (Close to)
- Has liked: 0
- Been liked: 1 time
Re: Mods
Gene, the eyeglasses....are those to help you "keep your eye on the road" (literally!)???ekap1200 wrote:
Ron in Oregon
AVA Webmaster ("master" is optimistic!)
AVA Board Member
1995 Voyager XII
AVA Webmaster ("master" is optimistic!)
AVA Board Member
1995 Voyager XII
-
ekap1200
- Master Fabricator
- Posts: 1364
- Joined: Fri Jul 04, 2008 12:54 pm
- 16
- Current bike(s): 2000 voyager end of year total. 108.634
- Location: Williamstown, New Jersey
- Has liked: 33 times
- Been liked: 134 times
Re: Mods
debron wrote:Gene, the eyeglasses....are those to help you "keep your eye on the road" (literally!)???ekap1200 wrote:
No Ron , but they and my key's always get hung up when I get on the creeper. last set got under the roller and got bent up a bit. "Its not bad if you don't know something, but when you don't know you don't know; That's when your in trouble". Joe Place 1912-2008 (my grandfather)
-
Scott-(Altoona, PA)
- King of the Road
- Posts: 1085
- Joined: Mon Feb 18, 2008 1:22 pm
- 16
- Current bike(s): 2001 Voyager XII
- Location: Altoona, PA
- Has liked: 83 times
- Been liked: 140 times
- Contact:
Re: Mods
Ron I saw them too and chuckled about it but laughed out loud this morning reading your post/question about them. Loud enough to grab the attention of others in the house!
Mid-Atlantic Voyagers chapter secretary {"scribe"}
2001 Voyager XII
We may not know them all, but we owe them all! Thank a Veteran today!
2001 Voyager XII
We may not know them all, but we owe them all! Thank a Veteran today!
-
Lucasind
- King of the Road
- Posts: 1790
- Joined: Mon Dec 17, 2012 5:44 pm
- 11
- Current bike(s): 2003 Voyager 1200
1988 Voyager 1200
1985 Voyager 1300
2008 Concourse 1400
1985 LTD 1100
1981 CSR 1000
1981 CSR 650
1979 KZ 650
1973 XL 350
1988 Eliminator
1975 CB 125
1965 S 65
and a bunch of parts ! - Location: Toledo, OH
- Has liked: 194 times
- Been liked: 69 times
Re: Mods
....Hello Gene.
Put me down for the fender piece,and the GPS piece please. If there is a list ...put me on it(no hurry).
Put me down for the fender piece,and the GPS piece please. If there is a list ...put me on it(no hurry).
90% OF ANY JOB ...IS GETTING STARTED !