Unclear on battery sensor disable??

[Coastvoyager]

Hello all,
New the forum and my 00 Voyager I just purchased. The P/O installed a battery without a place to install the sensor, AGM or?. I have the sensor, and it has what I believe is a diode just upstream of the part that drops into the battery? at. It all looks like a factory setup. So I have a several inches long piece of blue wire that was unplugged from the rest of the harness, then the diode or what ever it is, then a inch or so of yellow wire and then the sensor head. Do you simply leave the entire sensor/diode off and land the bike harness's blue wire to the battery to keep the light off? Sorry if this sounds overly complicated or confusing.
Thanks guys.

[Brh8]

http://www.amervoyassoc.org/forum/viewt ... f=3&t=8861" onclick="window.open(this.href);return false;


Look at Rhine stone kawboy suggestion

[chevyman1]

Take the wire that go's to the sensor and connect it to the orange wire on the turn signal flasher ( it's mounted on the battery hold down ) I usually put a resistor in between but I don't think you have to.
That wire only has power when the key is on so it won't drain the battery.

[Coastvoyager]

Thanks Guys, did the Kawboy mod and it took care of things.