water in oil

This is for general posts and questions concerning only the Voyager 1300 Six-Cylinder.

Moderators: the2knights, Highway Rider

Post Reply
gunshot
Newbie
Newbie
Posts: 2
Joined: Sat Dec 14, 2013 1:14 am
10
Current bike(s): 2013 vulcan voyager,2009 bmw 1200lt 1996 gl1500
Has liked: 0
Been liked: 0

water in oil

Post by gunshot »

Hello to everyone, new member and new owner of a 1988 zn1300 voyager,the bike has been sitting for about six months and started about onetime a week,when I changed the oil it looks like it has water in it is there anywhere it can get water besides a head gasket TKS
User avatar
Me Again
King of the Road
King of the Road
Posts: 1787
Joined: Sun Feb 24, 2008 4:27 am
16
Current bike(s): 1988 1300 Voyager
Location: Wisconsin
Has liked: 0
Been liked: 262 times

Re: water in oil

Post by Me Again »

water or antifreeze ?
Ozymandias
Cruiser
Cruiser
Posts: 40
Joined: Sat May 24, 2014 12:48 am
10
Current bike(s): 2010 Kawasaki 1700 Voyager
Location: Nebraska
Has liked: 1 time
Been liked: 0

Re: water in oil

Post by Ozymandias »

If you were starting it once a week, unless everything came up to full operating temperature for a reasonable period of time, I would say that ordinary condensation is probably the culprit. As asked above: is it water or antifreeze?
1975 Goldwing (found a good home for it)
2003 Nomad 1500 (traded for the Voyager)
2010 Voyager 1700
User avatar
Me Again
King of the Road
King of the Road
Posts: 1787
Joined: Sun Feb 24, 2008 4:27 am
16
Current bike(s): 1988 1300 Voyager
Location: Wisconsin
Has liked: 0
Been liked: 262 times

Re: water in oil

Post by Me Again »

Ozymandias wrote:If you were starting it once a week, unless everything came up to full operating temperature for a reasonable period of time, I would say that ordinary condensation is probably the culprit. As asked above: is it water or antifreeze?
That was my thought also.
gunshot
Newbie
Newbie
Posts: 2
Joined: Sat Dec 14, 2013 1:14 am
10
Current bike(s): 2013 vulcan voyager,2009 bmw 1200lt 1996 gl1500
Has liked: 0
Been liked: 0

Re: water in oil

Post by gunshot »

Looks like water to me, condensation on the sight glass and when I drain the oil the first half pint is milky. TKS
User avatar
Rick near Kansas city
Cruiser
Cruiser
Posts: 64
Joined: Mon Feb 18, 2008 1:09 am
16
Current bike(s): 2003 VOYAGER XII
Location: Missouri
Has liked: 0
Been liked: 0

Re: water in oil

Post by Rick near Kansas city »

Take a look at the hose that comes off the back of the secondary air box. It goes to the motor and if it is off and you wash the bike water could get in that way.
Post Reply

Return to “General - Voyager 1300 Six”