Thanks to all who helped on my gas leak! After stripping it all apart and wondered if I will ever get it back together again...we have success!!!!
Here's my problem, the gear pattern is upside down??? 1 is up and the rest are down. Is there an easy fix our am I pulling the gear case and fumbling around.
shift sequence backwards
Moderators: the2knights, Highway Rider
-
jlukas4165
- Newbie
- Posts: 5
- Joined: Tue Jun 23, 2015 4:07 pm
- 9
- Current bike(s): 1987 Kawasaki Voyager 1200
1989 Kawasaki Voyager 1200
1987 Honda 1100 VT
1981 Honda Goldwing GL1100 - Has liked: 0
- Been liked: 0
-
Bill O
- Past Board Member
- Posts: 285
- Joined: Mon Feb 18, 2008 12:28 am
- 16
- Current bike(s): 1994 1200 Voyager
2003 1200 Voyager
2003 1200 Voyager TriKing Trike - Location: Las Vegas, NV, USA
- Has liked: 0
- Been liked: 6 times
Re: shift sequence backwards
Does your bike have the driver floorboards and heel-toe shifter. If so, the Driver floorboards were incorrectly installed. The Installation instructions are posted in the Tech Section.jlukas4165 wrote:Thanks to all who helped on my gas leak! After stripping it all apart and wondered if I will ever get it back together again...we have success!!!!
Here's my problem, the gear pattern is upside down??? 1 is up and the rest are down. Is there an easy fix our am I pulling the gear case and fumbling around.
Bill O
If it ain't broke, don't fix it!
1994 Voyager
2003 Voyager
2003 Voyager TriKing Trike
Nevada Patriot Guard Rider
1994 Voyager
2003 Voyager
2003 Voyager TriKing Trike
Nevada Patriot Guard Rider
-
jlukas4165
- Newbie
- Posts: 5
- Joined: Tue Jun 23, 2015 4:07 pm
- 9
- Current bike(s): 1987 Kawasaki Voyager 1200
1989 Kawasaki Voyager 1200
1987 Honda 1100 VT
1981 Honda Goldwing GL1100 - Has liked: 0
- Been liked: 0
Re: shift sequence backwards
No the bike does not have driver floorboard, it also has the plain toe shifter, not heal toe.
This was a barn find with 18k miles, so I'm unaware of any history. Other than the reverse shifting pattern the bike runs great
This was a barn find with 18k miles, so I'm unaware of any history. Other than the reverse shifting pattern the bike runs great
-
Lance McCaw
- Traveler
- Posts: 142
- Joined: Wed Nov 27, 2013 2:50 am
- 11
- Current bike(s): 1987 Kawasaki Voyager, 1985 Honda 700 Sabre
- Location: Aledo IL
- Has liked: 0
- Been liked: 1 time
-
Lucasind
- King of the Road
- Posts: 1790
- Joined: Mon Dec 17, 2012 5:44 pm
- 11
- Current bike(s): 2003 Voyager 1200
1988 Voyager 1200
1985 Voyager 1300
2008 Concourse 1400
1985 LTD 1100
1981 CSR 1000
1981 CSR 650
1979 KZ 650
1973 XL 350
1988 Eliminator
1975 CB 125
1965 S 65
and a bunch of parts ! - Location: Toledo, OH
- Has liked: 194 times
- Been liked: 69 times
Re: shift sequence backwards
The shift shaft must rotate in a counter clockwise direction going into first gear on a normal XII.
90% OF ANY JOB ...IS GETTING STARTED !
-
doug of so fla
- Grand Tourer
- Posts: 431
- Joined: Tue Feb 19, 2008 6:17 pm
- 16
- Current bike(s): 07 gold wing
- Location: summerfield, fl
- Has liked: 0
- Been liked: 1 time
Re: shift sequence backwards
Someone could post a photo of the correct shift linkage position on the XII. That would help him out..
doug of no fla
-
chevyman1
- Board Member
- Posts: 731
- Joined: Sat Jun 06, 2009 5:59 pm
- 15
- Current bike(s): 1990 Kawasaki Voyager XII
1991 Kawasaki Voyager XII
1993 Kawasaki Voyager XII
1972 Yamaha LS2 100cc twin 2 stroke - Location: Myerstown, Pa.
- Has liked: 0
- Been liked: 16 times
Re: shift sequence backwards
The arm on the transmission is wrong it should be pointing in a upward direction.
President - Mid-Atlantic Voyagers
1990 Voyager XII
1991 Voyager XII (Team Green)
1972 Yamaha LS2 (100cc Twin 2stroke)
Voyagers Voice editor SEND ME STORIES AND PICTURES PLEASE
to. (kew427@comcast.net)
1990 Voyager XII
1991 Voyager XII (Team Green)
1972 Yamaha LS2 (100cc Twin 2stroke)
Voyagers Voice editor SEND ME STORIES AND PICTURES PLEASE
to. (kew427@comcast.net)
-
Mr Jensee
- King of the Road
- Posts: 1987
- Joined: Fri Dec 26, 2008 5:55 pm
- 15
- Current bike(s): Phone 337-781-8158
Home Phone disconnected.
Previous bikes. Yamaha 180, Honda CM200T, Suzuki 1000LNKawasaki ZRX1100. - Location: Lafayette, La
- Has liked: 0
- Been liked: 9 times
Re: shift sequence backwards
Click on the link in my signature for the service manuals.
For Voyager XII Manuals click the link below.
https://1drv.ms/f/s!Ao3K0Ai2gvglgS3l7J4pBJrjfBhc
https://1drv.ms/f/s!Ao3K0Ai2gvglgS3l7J4pBJrjfBhc
-
jlukas4165
- Newbie
- Posts: 5
- Joined: Tue Jun 23, 2015 4:07 pm
- 9
- Current bike(s): 1987 Kawasaki Voyager 1200
1989 Kawasaki Voyager 1200
1987 Honda 1100 VT
1981 Honda Goldwing GL1100 - Has liked: 0
- Been liked: 0
Re: shift sequence backwards
Thanks, but the arm is up. Everything appears as it should. Without allot to go by, it appears I may have to open it up thinking maybe someone before me did not set the the neutral positioning lever correctly or gear positioning lever. Hoping it might have been something simple
-
triton28
- King of the Road
- Posts: 1007
- Joined: Fri Aug 23, 2013 1:32 am
- 11
- Current bike(s): 1987 ZG-1200 B1
1987 ZG-1200 B1
1990 ZG-1200 B4 - Location: Nova Scotia Canada
- Has liked: 106 times
- Been liked: 275 times
Re: shift sequence backwards
both arms need to be up as shown in the link below. If the footpeg arm is upside down, one would have to lift up for 1st gear.
http://www.abbikeboard.com/forum/viewto ... water+pump" onclick="window.open(this.href);return false;
http://www.abbikeboard.com/forum/viewto ... water+pump" onclick="window.open(this.href);return false;