MISSING ON LOAD
Moderators: the2knights, Highway Rider
-
- Traveler
- Posts: 130
- Joined: Mon Sep 06, 2010 5:42 pm
- 14
- Current bike(s): 2011 Kawasaski 1700
- Has liked: 0
- Been liked: 0
MISSING ON LOAD
Well I may have messed up. I was getting on the bike running the rpm/speed up to around 90 mph, all at once it started missing bad under load in lower gears and the bike shudders at high speed roll ons. At normal cruising speed the miss is gone. One of my spark plug caps is broken on the bottom almost up to where it plugs onto the plug. The bike has new plugs, air and fuel filter last year. The carbs have been gone through and it was finally getting around 48-50 mpg. Any ideas??? ohiojack
- Tonyvdb
- Grand Tourer
- Posts: 530
- Joined: Thu May 29, 2014 11:36 pm
- 10
- Current bike(s): 2017 Victory Vision
1996 Voyager (Just sold)
1981 GPZ 550 (Previous bike) - Location: Edmonton, Alberta, Canada
- Has liked: 0
- Been liked: 0
Re: MISSING ON LOAD
That's the problem right there, you will need to replace that cap with a new one as the spark is jumping out of the cap at the break.ohiojack wrote:One of my spark plug caps is broken on the bottom almost up to where it plugs onto the plug.
They are really available at NAPA or other parts places. They just unscrew from the wire.
2017 Gloss black Victory Vision
1996 Kawasaki Voyager Just sold
1981 Kawasaki GPZ550 (sold)
1996 Kawasaki Voyager Just sold
1981 Kawasaki GPZ550 (sold)
-
- Traveler
- Posts: 130
- Joined: Mon Sep 06, 2010 5:42 pm
- 14
- Current bike(s): 2011 Kawasaski 1700
- Has liked: 0
- Been liked: 0
Re: MISSING ON LOAD
I was wondering if the cap was the problem, thanks for the response. ohiojack ps Are you going to the the rally in June??
- Lucasind
- King of the Road
- Posts: 1790
- Joined: Mon Dec 17, 2012 5:44 pm
- 11
- Current bike(s): 2003 Voyager 1200
1988 Voyager 1200
1985 Voyager 1300
2008 Concourse 1400
1985 LTD 1100
1981 CSR 1000
1981 CSR 650
1979 KZ 650
1973 XL 350
1988 Eliminator
1975 CB 125
1965 S 65
and a bunch of parts ! - Location: Toledo, OH
- Has liked: 194 times
- Been liked: 69 times
Re: MISSING ON LOAD
....I remember our DEARLY departed AVA member, and former webmaster (debron,Ron Riggs) had the same thing happen to his XII on a cross country trip, I think you could find his post from a few years back if you did a search,.....turned out a plug cap and/or wire replacement made his XII ride like a new bike again ! likely that is what you have here , good it showed up now ,before heading to the rally !giving you plenty of time to correct this very minor issue
90% OF ANY JOB ...IS GETTING STARTED !
- Mr Jensee
- King of the Road
- Posts: 1987
- Joined: Fri Dec 26, 2008 5:55 pm
- 15
- Current bike(s): Phone 337-781-8158
Home Phone disconnected.
Previous bikes. Yamaha 180, Honda CM200T, Suzuki 1000LNKawasaki ZRX1100. - Location: Lafayette, La
- Has liked: 0
- Been liked: 9 times
Re: MISSING ON LOAD
I agree it's the plug cap but also make sure your fuel line around the filter and pump is not in anyway kinked that might starve the engine of fuel at high speeds.
For Voyager XII Manuals click the link below.
https://1drv.ms/f/s!Ao3K0Ai2gvglgS3l7J4pBJrjfBhc
https://1drv.ms/f/s!Ao3K0Ai2gvglgS3l7J4pBJrjfBhc
- the2knights
- Board Member
- Posts: 223
- Joined: Sat Aug 04, 2012 1:05 pm
- 12
- Current bike(s): Current 1999 Voyager XII 1993 Voyager XII 2005 Harley Road King
Past 86 Voyager XII Honda SilverWing Honda CB900Custom Suzuki GS1000 Yamaha 80 - Location: Bloomington, IN
- Has liked: 32 times
- Been liked: 8 times
Re: MISSING ON LOAD
I am jumping on the band wagon as well. I put new caps on last year. When you do so, make sure you check the boots and the end of the wires, I took about 1/4" off each of mine just to make sure the connection was real good. I found a set of NGK caps for sale cheaper than ordering OEM last year.
-
- King of the Road
- Posts: 1010
- Joined: Fri Aug 23, 2013 1:32 am
- 11
- Current bike(s): 1987 ZG-1200 B1
1987 ZG-1200 B1
1990 ZG-1200 B4 - Location: Nova Scotia Canada
- Has liked: 107 times
- Been liked: 278 times
Re: MISSING ON LOAD
These are the least expensive plug caps I have found: http://z1parts.net/ngk-sd05f-spark-plug-cover" onclick="window.open(this.href);return false;
Dave
Dave
-
- Traveler
- Posts: 130
- Joined: Mon Sep 06, 2010 5:42 pm
- 14
- Current bike(s): 2011 Kawasaski 1700
- Has liked: 0
- Been liked: 0
Re: MISSING ON LOAD
Thanks for the answers, I will get new caps. Also I noticed the cruise now does not work. Hopefully the two issues are related. ohiojack
-
- Traveler
- Posts: 130
- Joined: Mon Sep 06, 2010 5:42 pm
- 14
- Current bike(s): 2011 Kawasaski 1700
- Has liked: 0
- Been liked: 0
Re: MISSING ON LOAD
Well I started checking things, first I put in a new gas filter and checked the lines. Test rode the bike and the miss/shudder was still there. I replaced the bad plug cap, the miss was still there. I finally pulled all the plugs they all look the same, no evidence of missing, they all look clean. I'm beginning to wonder if the fuel pump is giving out or if I have problem with the cdi/box. I'm going to double check the air filter to make sure I don't have a mouse nest. I'm still looking. The bike is starting to make me wonder if I will find the problem!! ohiojack
- Tonyvdb
- Grand Tourer
- Posts: 530
- Joined: Thu May 29, 2014 11:36 pm
- 10
- Current bike(s): 2017 Victory Vision
1996 Voyager (Just sold)
1981 GPZ 550 (Previous bike) - Location: Edmonton, Alberta, Canada
- Has liked: 0
- Been liked: 0
Re: MISSING ON LOAD
Are you 100% sure that the spark plug is not cracked? If you put too much side pressure on them as you remove or put them in you can crack the ceramic sleeve and the spark can jump out of that crack (I know this because I've done it) and it's really hard to see the crack.
2017 Gloss black Victory Vision
1996 Kawasaki Voyager Just sold
1981 Kawasaki GPZ550 (sold)
1996 Kawasaki Voyager Just sold
1981 Kawasaki GPZ550 (sold)
-
- Traveler
- Posts: 130
- Joined: Mon Sep 06, 2010 5:42 pm
- 14
- Current bike(s): 2011 Kawasaski 1700
- Has liked: 0
- Been liked: 0
Re: MISSING ON LOAD
I checked with my local mechanic at the kawasaki dealership and he said to check the mains, needle and diaphram . The needle and diaphram's checked out, no holes, tares or problems. I pulled the bowls and checked the mains. One main jet had a piece of plastic/ junk stuck in it. I had to use compressed air to get it out. Got the bike back together but haven,t had time to ride it yet.. hopefully it's fixed.
- Lucasind
- King of the Road
- Posts: 1790
- Joined: Mon Dec 17, 2012 5:44 pm
- 11
- Current bike(s): 2003 Voyager 1200
1988 Voyager 1200
1985 Voyager 1300
2008 Concourse 1400
1985 LTD 1100
1981 CSR 1000
1981 CSR 650
1979 KZ 650
1973 XL 350
1988 Eliminator
1975 CB 125
1965 S 65
and a bunch of parts ! - Location: Toledo, OH
- Has liked: 194 times
- Been liked: 69 times
Re: MISSING ON LOAD
Hey Jack , I just noticed that you gave me ring on my cell, Sounds like you found the problem,.....Tony
90% OF ANY JOB ...IS GETTING STARTED !
-
- Traveler
- Posts: 130
- Joined: Mon Sep 06, 2010 5:42 pm
- 14
- Current bike(s): 2011 Kawasaski 1700
- Has liked: 0
- Been liked: 0
Re: MISSING ON LOAD
Thats ok Tony, you we're probably out riding. I hope this problem is gone. ohiojack