MISSING ON LOAD

Got a tech tip for Voyager 12's from your personal experiences, or one complete with pictures and instructions, here's where to post it. You can also ask about tips or procedures here.

Moderators: the2knights, Highway Rider

Post Reply
ohiojack
Traveler
Traveler
Posts: 130
Joined: Mon Sep 06, 2010 5:42 pm
14
Current bike(s): 2011 Kawasaski 1700
Has liked: 0
Been liked: 0

MISSING ON LOAD

Post by ohiojack »

Well I may have messed up. I was getting on the bike running the rpm/speed up to around 90 mph, all at once it started missing bad under load in lower gears and the bike shudders at high speed roll ons. At normal cruising speed the miss is gone. One of my spark plug caps is broken on the bottom almost up to where it plugs onto the plug. The bike has new plugs, air and fuel filter last year. The carbs have been gone through and it was finally getting around 48-50 mpg. Any ideas??? ohiojack
User avatar
Tonyvdb
Grand Tourer
Grand Tourer
Posts: 530
Joined: Thu May 29, 2014 11:36 pm
10
Current bike(s): 2017 Victory Vision
1996 Voyager (Just sold)
1981 GPZ 550 (Previous bike)
Location: Edmonton, Alberta, Canada
Has liked: 0
Been liked: 0

Re: MISSING ON LOAD

Post by Tonyvdb »

ohiojack wrote:One of my spark plug caps is broken on the bottom almost up to where it plugs onto the plug.
That's the problem right there, you will need to replace that cap with a new one as the spark is jumping out of the cap at the break.
They are really available at NAPA or other parts places. They just unscrew from the wire.
2017 Gloss black Victory Vision
1996 Kawasaki Voyager Just sold
1981 Kawasaki GPZ550 (sold)
ohiojack
Traveler
Traveler
Posts: 130
Joined: Mon Sep 06, 2010 5:42 pm
14
Current bike(s): 2011 Kawasaski 1700
Has liked: 0
Been liked: 0

Re: MISSING ON LOAD

Post by ohiojack »

I was wondering if the cap was the problem, thanks for the response. ohiojack ps Are you going to the the rally in June??
User avatar
Lucasind
King of the Road
King of the Road
Posts: 1790
Joined: Mon Dec 17, 2012 5:44 pm
11
Current bike(s): 2003 Voyager 1200
1988 Voyager 1200
1985 Voyager 1300
2008 Concourse 1400
1985 LTD 1100
1981 CSR 1000
1981 CSR 650
1979 KZ 650
1973 XL 350
1988 Eliminator
1975 CB 125
1965 S 65
and a bunch of parts !
Location: Toledo, OH
Has liked: 194 times
Been liked: 69 times

Re: MISSING ON LOAD

Post by Lucasind »

....I remember our DEARLY departed AVA member, and former webmaster (debron,Ron Riggs) had the same thing happen to his XII on a cross country trip, I think you could find his post from a few years back if you did a search,.....turned out a plug cap and/or wire replacement made his XII ride like a new bike again ! :clap: likely that is what you have here , good it showed up now ,before heading to the rally !giving you plenty of time to correct this very minor issue :pray:
90% OF ANY JOB ...IS GETTING STARTED !
User avatar
Mr Jensee
King of the Road
King of the Road
Posts: 1987
Joined: Fri Dec 26, 2008 5:55 pm
15
Current bike(s): Phone 337-781-8158
Home Phone disconnected.
Previous bikes. Yamaha 180, Honda CM200T, Suzuki 1000LNKawasaki ZRX1100.
Location: Lafayette, La
Has liked: 0
Been liked: 9 times

Re: MISSING ON LOAD

Post by Mr Jensee »

I agree it's the plug cap but also make sure your fuel line around the filter and pump is not in anyway kinked that might starve the engine of fuel at high speeds.
For Voyager XII Manuals click the link below.
https://1drv.ms/f/s!Ao3K0Ai2gvglgS3l7J4pBJrjfBhc
User avatar
the2knights
Board Member
Board Member
Posts: 223
Joined: Sat Aug 04, 2012 1:05 pm
12
Current bike(s): Current 1999 Voyager XII 1993 Voyager XII 2005 Harley Road King
Past 86 Voyager XII Honda SilverWing Honda CB900Custom Suzuki GS1000 Yamaha 80
Location: Bloomington, IN
Has liked: 32 times
Been liked: 8 times

Re: MISSING ON LOAD

Post by the2knights »

I am jumping on the band wagon as well. I put new caps on last year. When you do so, make sure you check the boots and the end of the wires, I took about 1/4" off each of mine just to make sure the connection was real good. I found a set of NGK caps for sale cheaper than ordering OEM last year.
triton28
King of the Road
King of the Road
Posts: 1010
Joined: Fri Aug 23, 2013 1:32 am
11
Current bike(s): 1987 ZG-1200 B1
1987 ZG-1200 B1
1990 ZG-1200 B4
Location: Nova Scotia Canada
Has liked: 107 times
Been liked: 278 times

Re: MISSING ON LOAD

Post by triton28 »

These are the least expensive plug caps I have found: http://z1parts.net/ngk-sd05f-spark-plug-cover" onclick="window.open(this.href);return false;

Dave
ohiojack
Traveler
Traveler
Posts: 130
Joined: Mon Sep 06, 2010 5:42 pm
14
Current bike(s): 2011 Kawasaski 1700
Has liked: 0
Been liked: 0

Re: MISSING ON LOAD

Post by ohiojack »

Thanks for the answers, I will get new caps. Also I noticed the cruise now does not work. Hopefully the two issues are related. ohiojack
ohiojack
Traveler
Traveler
Posts: 130
Joined: Mon Sep 06, 2010 5:42 pm
14
Current bike(s): 2011 Kawasaski 1700
Has liked: 0
Been liked: 0

Re: MISSING ON LOAD

Post by ohiojack »

Well I started checking things, first I put in a new gas filter and checked the lines. Test rode the bike and the miss/shudder was still there. I replaced the bad plug cap, the miss was still there. I finally pulled all the plugs they all look the same, no evidence of missing, they all look clean. I'm beginning to wonder if the fuel pump is giving out or if I have problem with the cdi/box. I'm going to double check the air filter to make sure I don't have a mouse nest. I'm still looking. The bike is starting to make me wonder if I will find the problem!! ohiojack
User avatar
Tonyvdb
Grand Tourer
Grand Tourer
Posts: 530
Joined: Thu May 29, 2014 11:36 pm
10
Current bike(s): 2017 Victory Vision
1996 Voyager (Just sold)
1981 GPZ 550 (Previous bike)
Location: Edmonton, Alberta, Canada
Has liked: 0
Been liked: 0

Re: MISSING ON LOAD

Post by Tonyvdb »

Are you 100% sure that the spark plug is not cracked? If you put too much side pressure on them as you remove or put them in you can crack the ceramic sleeve and the spark can jump out of that crack (I know this because I've done it) and it's really hard to see the crack.
2017 Gloss black Victory Vision
1996 Kawasaki Voyager Just sold
1981 Kawasaki GPZ550 (sold)
voyager55
Elite Tourer
Elite Tourer
Posts: 820
Joined: Mon Aug 19, 2013 6:08 am
11
Current bike(s): 2003 1200
Location: Eden Prairie, MN
Has liked: 1 time
Been liked: 3 times

Re: MISSING ON LOAD

Post by voyager55 »

Try some Sea foam in your gas, might have some junk in the carbs
ohiojack
Traveler
Traveler
Posts: 130
Joined: Mon Sep 06, 2010 5:42 pm
14
Current bike(s): 2011 Kawasaski 1700
Has liked: 0
Been liked: 0

Re: MISSING ON LOAD

Post by ohiojack »

I checked with my local mechanic at the kawasaki dealership and he said to check the mains, needle and diaphram . The needle and diaphram's checked out, no holes, tares or problems. I pulled the bowls and checked the mains. One main jet had a piece of plastic/ junk stuck in it. I had to use compressed air to get it out. Got the bike back together but haven,t had time to ride it yet.. hopefully it's fixed. :pray:
User avatar
Lucasind
King of the Road
King of the Road
Posts: 1790
Joined: Mon Dec 17, 2012 5:44 pm
11
Current bike(s): 2003 Voyager 1200
1988 Voyager 1200
1985 Voyager 1300
2008 Concourse 1400
1985 LTD 1100
1981 CSR 1000
1981 CSR 650
1979 KZ 650
1973 XL 350
1988 Eliminator
1975 CB 125
1965 S 65
and a bunch of parts !
Location: Toledo, OH
Has liked: 194 times
Been liked: 69 times

Re: MISSING ON LOAD

Post by Lucasind »

Hey Jack , I just noticed that you gave me ring on my cell, Sounds like you found the problem,.....Tony :-D
90% OF ANY JOB ...IS GETTING STARTED !
ohiojack
Traveler
Traveler
Posts: 130
Joined: Mon Sep 06, 2010 5:42 pm
14
Current bike(s): 2011 Kawasaski 1700
Has liked: 0
Been liked: 0

Re: MISSING ON LOAD

Post by ohiojack »

Thats ok Tony, you we're probably out riding. I hope this problem is gone. ohiojack
Post Reply

Return to “Tech Tips - Voyager XII (1200 Four)”