considering possible reasons for lifter clatter

Got a tech tip for Voyager 12's from your personal experiences, or one complete with pictures and instructions, here's where to post it. You can also ask about tips or procedures here.

Moderators: the2knights, Highway Rider

Post Reply
User avatar
Lumpy Rider
Cruiser
Cruiser
Posts: 90
Joined: Wed Jun 11, 2014 4:37 am
10
Current bike(s): 2001 Voyager
2003 Suzuki Intruder
Location: Northglenn, Colorado
Has liked: 0
Been liked: 0

considering possible reasons for lifter clatter

Post by Lumpy Rider »

Despite trying all of the solutions by Voyagers given for minimizing the lifter clatter that seems characteristic of many XIIs, my engine still experiences what I feel at times is excessive clatter. In as much, I have a hard time believing the root cause is gunk in the lifters. I was wondering if anyone has tried to "science out" this problem and, specifically, whether the clatter could be linked to a more abstract problem such as with oil pressure or whether engines run lean or rich or problems associated with low usage. I test rode a poorly maintained XII with 88,000 miles in my area recently and was surprised to hear the engine run as quiet as a sewing machine over a range of rpm's. Any takers on this line of thinking?
2001 Voyager XII
User avatar
Lumpy Rider
Cruiser
Cruiser
Posts: 90
Joined: Wed Jun 11, 2014 4:37 am
10
Current bike(s): 2001 Voyager
2003 Suzuki Intruder
Location: Northglenn, Colorado
Has liked: 0
Been liked: 0

Re: considering possible reasons for lifter clatter

Post by Lumpy Rider »

I have noted on my Kawi that sometimes the lifters bleed down and must re-prime when it is parked and other times not. Also, at times they bleed off at idle speed and other times they do not, and for brief moments at higher rpm's when the engine is not under load (i.e. sudden deceleration). After running ATF, MMM, Seafoam, Rotella 15w-40, using anti foam Valvoline oil and paying meticulous attention to oil changes over a range of 6000 miles would clear any gunk from the check valve of hydraulic lifters, but it has not for my XII. Any thoughts? The clatter is intermittent and makes me nuts as you can tell here :tho: Have faced this issue back in the day on a number of auto engines like the 327, 330, 283, 289 and 360 and was able to solve the problem, but not on my Kawi.
2001 Voyager XII
User avatar
ekap1200
Master Fabricator
Master Fabricator
Posts: 1364
Joined: Fri Jul 04, 2008 12:54 pm
16
Current bike(s): 2000 voyager end of year total. 108.634
Location: Williamstown, New Jersey
Has liked: 33 times
Been liked: 134 times

Re: considering possible reasons for lifter clatter

Post by ekap1200 »

Lumpy Rider wrote:I have noted on my Kawi that sometimes the lifters bleed down and must re-prime when it is parked and other times not. Also, at times they bleed off at idle speed and other times they do not, and for brief moments at higher rpm's when the engine is not under load (i.e. sudden deceleration). After running ATF, MMM, Seafoam, Rotella 15w-40, using anti foam Valvoline oil and paying meticulous attention to oil changes over a range of 6000 miles would clear any gunk from the check valve of hydraulic lifters, but it has not for my XII. Any thoughts? The clatter is intermittent and makes me nuts as you can tell here :tho: Have faced this issue back in the day on a number of auto engines like the 327, 330, 283, 289 and 360 and was able to solve the problem, but not on my Kawi.
time to call Carl Leo, and do whatever he says, even if it is swapping out an engine.
"Its not bad if you don't know something, but when you don't know you don't know; That's when your in trouble". Joe Place 1912-2008 (my grandfather)
User avatar
Lucasind
King of the Road
King of the Road
Posts: 1790
Joined: Mon Dec 17, 2012 5:44 pm
11
Current bike(s): 2003 Voyager 1200
1988 Voyager 1200
1985 Voyager 1300
2008 Concourse 1400
1985 LTD 1100
1981 CSR 1000
1981 CSR 650
1979 KZ 650
1973 XL 350
1988 Eliminator
1975 CB 125
1965 S 65
and a bunch of parts !
Location: Toledo, OH
Has liked: 194 times
Been liked: 69 times

Re: considering possible reasons for lifter clatter

Post by Lucasind »

viewtopic.php?t=3896" onclick="window.open(this.href);return false;

This link is a old thread started by "Farmer Al" about the same problem . ,don't know if you have ever read this thread.
90% OF ANY JOB ...IS GETTING STARTED !
User avatar
Lumpy Rider
Cruiser
Cruiser
Posts: 90
Joined: Wed Jun 11, 2014 4:37 am
10
Current bike(s): 2001 Voyager
2003 Suzuki Intruder
Location: Northglenn, Colorado
Has liked: 0
Been liked: 0

Re: considering possible reasons for lifter clatter

Post by Lumpy Rider »

I had not read this thread. Thanks. The tooling and oil galley theories sound plausible. I want to get to the bottom of this issue though my financial means are somewhat limited. I love the sound of the engine when it runs properly..reminiscent of the KZ bikes I've owned. Do you know if the Voyager's rocker arms have a pre-load adjustment?
2001 Voyager XII
User avatar
Lucasind
King of the Road
King of the Road
Posts: 1790
Joined: Mon Dec 17, 2012 5:44 pm
11
Current bike(s): 2003 Voyager 1200
1988 Voyager 1200
1985 Voyager 1300
2008 Concourse 1400
1985 LTD 1100
1981 CSR 1000
1981 CSR 650
1979 KZ 650
1973 XL 350
1988 Eliminator
1975 CB 125
1965 S 65
and a bunch of parts !
Location: Toledo, OH
Has liked: 194 times
Been liked: 69 times

Re: considering possible reasons for lifter clatter

Post by Lucasind »

pages 4-13 thru 4-17 of the XII service manual goes into great detail about this subject. Too much to type here.
90% OF ANY JOB ...IS GETTING STARTED !
voyager55
Elite Tourer
Elite Tourer
Posts: 820
Joined: Mon Aug 19, 2013 6:08 am
11
Current bike(s): 2003 1200
Location: Eden Prairie, MN
Has liked: 1 time
Been liked: 3 times

Re: considering possible reasons for lifter clatter

Post by voyager55 »

I bought my 2003 in 2005. Since new the bike has always seemed noisy to me. Then other times I ride, it seemed quieter. Who knows why etc. I don't even think or worry about it any more. Nature of the beast I guess. Hasn't exploded yet! :-O

I use 15w 40 Rotella Carl recommends, change it every 3000 miles, and I'm happy.
User avatar
Lumpy Rider
Cruiser
Cruiser
Posts: 90
Joined: Wed Jun 11, 2014 4:37 am
10
Current bike(s): 2001 Voyager
2003 Suzuki Intruder
Location: Northglenn, Colorado
Has liked: 0
Been liked: 0

Re: considering possible reasons for lifter clatter

Post by Lumpy Rider »

Same here...at times it runs quieter as if there are fewer lifter/excessive lash events happening. Owners of older models - have you heard if they report the same noise?
2001 Voyager XII
Post Reply

Return to “Tech Tips - Voyager XII (1200 Four)”