Ignition switch
Moderators: the2knights, Highway Rider
-
Dnjiemor
- Streetster
- Posts: 15
- Joined: Thu Sep 17, 2015 12:59 pm
- 9
- Current bike(s): 1995 Kawasaki voyager zg1200
- Location: Tacoma
- Has liked: 0
- Been liked: 0
Ignition switch
Anyone have an ignition switch repair ideas. I had Pete franchi Help me diagnose my bike as to no power to radio.( btw. Thank you Pete , your awesome ) Turns out acc relay not getting power. Jumpered it in the brown molex connector and radio comes on but if I left it that way it would always be on . So the blue/white wire is not getting powered up. Anyone ever take an ignition switch apart and play ?
-
cushman eagle
- King of the Road
- Posts: 2015
- Joined: Sat Jan 22, 2011 10:08 pm
- 14
- Current bike(s): '99 Kawasaki Voyager 1200
1958 Cushman Eagle restoration has been finished,and have put 3030 miles on her! - Location: Orrville,Ohio
- Has liked: 881 times
- Been liked: 303 times
Re: Ignition switch
It is often the wires themselves that break due to the overtight tie strap against the steering head 
.I rewired my ignition switch harness to repair my problem 
,but did not take my switch apart.
.I rewired my ignition switch harness to repair my problem ,but did not take my switch apart.'99 Voyager VXII,'58 Cushman Eagle