I have a unique issue. I just purchased a 1995 Voyager 1200 ( love it), but Im 6'7 with a size 13 shoe. The issues I'm having is with the double seat I sit a bit forward which, when putting my feet up and down, takes a little maneuvering. I am looking for a replacement foot rest and shift/brake arm assembly that would allow for about 1/2 inch in length and 1/2 inch more on the pad and knob, to comfortably get my foot under the shift or on the brake.
I have tried searching ebay and other sites but run into two issues, 1) I get hits back for 1500 Vulcan or 2) OME only.
any one have some suggestion short of having the parts custom machined ?
Then other option I'm considering is replacing the passengers seat with a smaller seat, and changing the main to one that is slightly longer and does not have the back rest.
Thank you
After market parts
Moderators: the2knights, Highway Rider
-
- Newbie
- Posts: 1
- Joined: Fri Sep 09, 2016 9:29 pm
- 8
- Current bike(s): 1995 Voyager XII
- Has liked: 0
- Been liked: 0
- Mr Jensee
- King of the Road
- Posts: 1987
- Joined: Fri Dec 26, 2008 5:55 pm
- 15
- Current bike(s): Phone 337-781-8158
Home Phone disconnected.
Previous bikes. Yamaha 180, Honda CM200T, Suzuki 1000LNKawasaki ZRX1100. - Location: Lafayette, La
- Has liked: 0
- Been liked: 9 times
Re: After market parts
This is probably going to require special fabrication to achieve. The shift lever can be removed and raised some for a big foot but as for the brake lever you are out of luck.
For Voyager XII Manuals click the link below.
https://1drv.ms/f/s!Ao3K0Ai2gvglgS3l7J4pBJrjfBhc
https://1drv.ms/f/s!Ao3K0Ai2gvglgS3l7J4pBJrjfBhc