code I am getting

This is for general posts and questions concerning only the Voyager 1300 Six-Cylinder.

Moderators: the2knights, Highway Rider

Post Reply
tiredofbs4
Streetster
Streetster
Posts: 26
Joined: Fri Jul 15, 2016 1:05 am
8
Current bike(s): 1985 Kawasaki Voyager 1300
2005 Yamaha Majesty 400
Has liked: 0
Been liked: 0

code I am getting

Post by tiredofbs4 »

Is 2 long 3 short. Seems to mean Ignition Pulse |No ignition pulses are transmitted to control unit when cranking engine. | 2 long 3 short | Perform "Engine Speed Signal Test. and inspect ignition system damage. . Great! Except i need to know in english. What should I check and test?
User avatar
Me Again
King of the Road
King of the Road
Posts: 1787
Joined: Sun Feb 24, 2008 4:27 am
16
Current bike(s): 1988 1300 Voyager
Location: Wisconsin
Has liked: 0
Been liked: 262 times

Re: code I am getting

Post by Me Again »

First thing I usually ask is "when you turn the key on do you hear the fuel pump run for 5 seconds before it shuts off.
If you don't hear the pump running or it does not shut off you may just have a loose connection someplace
next I would unplug the computer and plug it back in .
I had a similar problem some years back and it turned out to be a loose pin on the computer harness
tiredofbs4
Streetster
Streetster
Posts: 26
Joined: Fri Jul 15, 2016 1:05 am
8
Current bike(s): 1985 Kawasaki Voyager 1300
2005 Yamaha Majesty 400
Has liked: 0
Been liked: 0

Re: code I am getting

Post by tiredofbs4 »

Yes on pump ty on computer will try. Ride safe
tiredofbs4
Streetster
Streetster
Posts: 26
Joined: Fri Jul 15, 2016 1:05 am
8
Current bike(s): 1985 Kawasaki Voyager 1300
2005 Yamaha Majesty 400
Has liked: 0
Been liked: 0

Re: code I am getting

Post by tiredofbs4 »

Yes on pump ty on computer will try. Ride safe
Post Reply

Return to “General - Voyager 1300 Six”