HELP - won't start !! ECM ???

This is for general posts and questions concerning only the Voyager 1300 Six-Cylinder.

Moderators: the2knights, Highway Rider

User avatar
Stoogefan
Streetster
Streetster
Posts: 29
Joined: Mon Jan 25, 2016 5:01 pm
8
Current bike(s): 1988 Kawasaki Voyager 1300
Location: SW Ontario, Canada
Has liked: 0
Been liked: 0

Re: HELP - won't start !! ECM ???

Post by Stoogefan »

I just want to make sure that I'm on the same page .... the DFI unit is about 4x4 inch, mounted under the sear / about the battery. Correct ?
I hate to sound like an idiot, but I've never owned a bike with so many damned electronics.
"Stoogefan"
Jeff - SW Ontario, Canada
User avatar
Me Again
King of the Road
King of the Road
Posts: 1789
Joined: Sun Feb 24, 2008 4:27 am
16
Current bike(s): 1988 1300 Voyager
Location: Wisconsin
Has liked: 0
Been liked: 262 times

Re: HELP - won't start !! ECM ???

Post by Me Again »

Stoogefan wrote:I just want to make sure that I'm on the same page .... the DFI unit is about 4x4 inch, mounted under the sear / about the battery. Correct ?
I hate to sound like an idiot, but I've never owned a bike with so many damned electronics.
Actually the DFI unit (Brain/computer) is about 6 inches and mounted on top the battery .
The smaller box mounted beside the battery is the Igniter .
User avatar
Stoogefan
Streetster
Streetster
Posts: 29
Joined: Mon Jan 25, 2016 5:01 pm
8
Current bike(s): 1988 Kawasaki Voyager 1300
Location: SW Ontario, Canada
Has liked: 0
Been liked: 0

Re: HELP - won't start !! ECM ???

Post by Stoogefan »

It turned out that it is in fact the DFI. I took the unit to my local repair guy, and his electronics whiz got into it. 2 of the transistors inside are burnt, 1 actually exploded, and one of the copper ribbons on the circuit board is melted. He offered to try to find replacements and try to repair it, but like everything else on the bike they can't be found. By this point, I was ready to roll the whole thing to the road.....
Next day, he calls me and says that he has found a replacement DFI off of a running (but no longer road worthy) bike at a wrecking yard 5 hours away. Knowing how pricey they can be, I prepare to choke and I ask how much ..... $250 plus shipping. It'll be here tomorrow !!!! :woohoo: Tonite I'll say a little prayer that it works.

Just wanted to give you guys an update, and again say thanks for all the help ! :thanks:
"Stoogefan"
Jeff - SW Ontario, Canada
User avatar
Stoogefan
Streetster
Streetster
Posts: 29
Joined: Mon Jan 25, 2016 5:01 pm
8
Current bike(s): 1988 Kawasaki Voyager 1300
Location: SW Ontario, Canada
Has liked: 0
Been liked: 0

Re: HELP - won't start !! ECM ???

Post by Stoogefan »

We're on the road again !!! :woohoo:
"Stoogefan"
Jeff - SW Ontario, Canada
User avatar
cranky
King of the Road
King of the Road
Posts: 1037
Joined: Wed Jul 06, 2016 12:36 am
8
Current bike(s): 2003 Voyager
Location: San Jose, KalEfornYa
Has liked: 303 times
Been liked: 80 times

Re: HELP - won't start !! ECM ???

Post by cranky »

Outstanding!!!!!! Great on Ya!!!!
'03 Voyager - http://tinyurl.com/mqtgpwp VROC pics of Gina
Cranky - Bill Snodgrass AVA # 6544. VROC # 16804
Cranked >128K miles, Mtn bike-no motor!!!
San Jose, KalEfornYa
cushman eagle
King of the Road
King of the Road
Posts: 1982
Joined: Sat Jan 22, 2011 10:08 pm
13
Current bike(s): '99 Kawasaki Voyager 1200
1958 Cushman Eagle restoration has been finished,and have put 3030 miles on her!
Location: Orrville,Ohio
Has liked: 854 times
Been liked: 290 times

Re: HELP - won't start !! ECM ???

Post by cushman eagle »

Stoogefan wrote:We're on the road again !!! :woohoo:
Glad to hear you got her going again! :woohoo:
'99 Voyager VXII,'58 Cushman Eagle
Post Reply

Return to “General - Voyager 1300 Six”