Getting ready to install progressive spring on the front, change the shock oil and new front wheel bearings. I am going to pull the front fender to clean it up. What is the part number for the front fender washers that I need to replace. Could not find them on the parts breakdown on "Babbitts"
Thanks in advance.
ED
Fender washers
Moderators: the2knights, Highway Rider
-
cushman eagle
- King of the Road
- Posts: 1982
- Joined: Sat Jan 22, 2011 10:08 pm
- 13
- Current bike(s): '99 Kawasaki Voyager 1200
1958 Cushman Eagle restoration has been finished,and have put 3030 miles on her! - Location: Orrville,Ohio
- Has liked: 852 times
- Been liked: 290 times
Re: Fender washers
Send a PM to ekap1200[Gene] he makes and sells them 
'99 Voyager VXII,'58 Cushman Eagle
-
voyager55
- Elite Tourer
- Posts: 820
- Joined: Mon Aug 19, 2013 6:08 am
- 11
- Current bike(s): 2003 1200
- Location: Eden Prairie, MN
- Has liked: 1 time
- Been liked: 3 times
Re: Fender washers
http://www.partshark.com/oemparts/p/kaw ... 745/collar $3.92 each Any dealer can order them or they might stock them
-
cranky
- King of the Road
- Posts: 1037
- Joined: Wed Jul 06, 2016 12:36 am
- 8
- Current bike(s): 2003 Voyager
- Location: San Jose, KalEfornYa
- Has liked: 303 times
- Been liked: 80 times
Re: Fender washers
... but... but... but, he really wants Gene's stainless steal inserts to keep the
front end solid!!!!! The stock ones squash...... Make sure to talk to Gene!!!
front end solid!!!!! The stock ones squash...... Make sure to talk to Gene!!!
'03 Voyager - http://tinyurl.com/mqtgpwp VROC pics of Gina
Cranky - Bill Snodgrass AVA # 6544. VROC # 16804
Cranked >128K miles, Mtn bike-no motor!!!
San Jose, KalEfornYa
Cranky - Bill Snodgrass AVA # 6544. VROC # 16804
Cranked >128K miles, Mtn bike-no motor!!!
San Jose, KalEfornYa
-
voyager55
- Elite Tourer
- Posts: 820
- Joined: Mon Aug 19, 2013 6:08 am
- 11
- Current bike(s): 2003 1200
- Location: Eden Prairie, MN
- Has liked: 1 time
- Been liked: 3 times
Re: Fender washers
I never had any squash in 12 years
crankyb wrote:... but... but... but, he really wants Gene's stainless steal inserts to keep the
front end solid!!!!! The stock ones squash...... Make sure to talk to Gene!!!
-
Eydugstr
- Traveler
- Posts: 101
- Joined: Fri May 27, 2016 8:29 pm
- 8
- Current bike(s): 1990 Kawasaki Voyager xii
2005 Kawasaki Concours
1972/77 CB750 - Location: Kansas City
- Has liked: 0
- Been liked: 5 times
Re: Fender washers
+1 for Gene Kap's washers.
It's pretty easy to check your old ones. Just pop the caps off of the fork brace, unscrew one of the bolts and remove the washer. If it's chewed up replace all four. You can go the OEM route but they aren't as good as quality as Gene's.
It's pretty easy to check your old ones. Just pop the caps off of the fork brace, unscrew one of the bolts and remove the washer. If it's chewed up replace all four. You can go the OEM route but they aren't as good as quality as Gene's.