Hi, I've check the IC Ignitor resistances against those listed in the manual that is posted on the site (Page 15-18). I get different resistances on some pins.
Some of mine are infinite, where the table in the book indicates that they should be 3.6-5.5 k-ohms or 13-24 k-ohms
My bike is:
Serial Number:JKAZG9B13PB505469
IC Igniter Part #: 2119-1248
Does anyone have a service manual for 1993 V XII? If so I'd like to know if it also lists the IC Igniter resistances (between pins) and if those are the same as the resistances listed in the posted manual (which is for 1986 model year).
I don't have the prescribed test meter. Instead I have a Fluke 75. Is that important?
Thanks
Martin
Calgary, Alberta
Igniter Resistance Pin Checks
Moderators: the2knights, Highway Rider
-
MartinKemp
- Streetster
- Posts: 24
- Joined: Fri Apr 07, 2017 5:11 pm
- 7
- Has liked: 0
- Been liked: 0
-
Mr Jensee
- King of the Road
- Posts: 1987
- Joined: Fri Dec 26, 2008 5:55 pm
- 15
- Current bike(s): Phone 337-781-8158
Home Phone disconnected.
Previous bikes. Yamaha 180, Honda CM200T, Suzuki 1000LNKawasaki ZRX1100. - Location: Lafayette, La
- Has liked: 0
- Been liked: 9 times
Re: Igniter Resistance Pin Checks
The service manual in my signature should cover all the years of the Voyager XII.
For Voyager XII Manuals click the link below.
https://1drv.ms/f/s!Ao3K0Ai2gvglgS3l7J4pBJrjfBhc
https://1drv.ms/f/s!Ao3K0Ai2gvglgS3l7J4pBJrjfBhc
-
triton28
- King of the Road
- Posts: 1007
- Joined: Fri Aug 23, 2013 1:32 am
- 11
- Current bike(s): 1987 ZG-1200 B1
1987 ZG-1200 B1
1990 ZG-1200 B4 - Location: Nova Scotia Canada
- Has liked: 105 times
- Been liked: 273 times
Re: Igniter Resistance Pin Checks
I am not sure of this but would there be any different readings between the 21119-1179 igniter and the post 1988 model 21119-1248 igniter?
-
JHD
- Traveler
- Posts: 158
- Joined: Fri May 27, 2011 4:58 am
- 13
- Current bike(s): '92 Voyager XII
'09 FLHT Police
'03 RE Bullet 500
'77 XS 360-2D - Location: Edmonds, WA
- Has liked: 0
- Been liked: 2 times
Re: Igniter Resistance Pin Checks
Tried doing resistance check of ignitor a few years back with Pete Franchi. Could test most pins but it seems that there were a few that needed a factory tester. Best bet is trying to borrow a ignitor from someone who has an extra. Also Carl Leo will tell you that it is very uncommon for an ignitor to fail.