Shift pattern
Moderators: the2knights, Highway Rider
-
jake100
- Streetster
- Posts: 23
- Joined: Tue Jan 09, 2018 12:31 am
- 6
- Current bike(s): 92 voyager
- Has liked: 0
- Been liked: 0
Shift pattern
How come my shfit pattern is 1 up and 4 down I thought it was supposed to be the other way around
-
triton28
- King of the Road
- Posts: 1007
- Joined: Fri Aug 23, 2013 1:32 am
- 11
- Current bike(s): 1987 ZG-1200 B1
1987 ZG-1200 B1
1990 ZG-1200 B4 - Location: Nova Scotia Canada
- Has liked: 105 times
- Been liked: 273 times
Re: Shift pattern
Sounds as though one of the shift linkage ball/socket arms is upside down.
See page 8_2, (exploded view), of the factory service manual for the correct orientation.
Dave
See page 8_2, (exploded view), of the factory service manual for the correct orientation.
Dave
-
Bill O
- Past Board Member
- Posts: 285
- Joined: Mon Feb 18, 2008 12:28 am
- 16
- Current bike(s): 1994 1200 Voyager
2003 1200 Voyager
2003 1200 Voyager TriKing Trike - Location: Las Vegas, NV, USA
- Has liked: 0
- Been liked: 6 times
Re: Shift pattern
If you have the front driver floorboards kit installed, the linkage was not reversed at the tranny side as per the instructions. The direction for the Floorboard Installation, I believe, are posted in the Tech Section of this site.
Bill O
Bill O
If it ain't broke, don't fix it!
1994 Voyager
2003 Voyager
2003 Voyager TriKing Trike
Nevada Patriot Guard Rider
1994 Voyager
2003 Voyager
2003 Voyager TriKing Trike
Nevada Patriot Guard Rider
