Wheel bearings??

Got a tech tip for Voyager 12's from your personal experiences, or one complete with pictures and instructions, here's where to post it. You can also ask about tips or procedures here.

Moderators: the2knights, Highway Rider

Post Reply
User avatar
usmalenurse
Traveler
Traveler
Posts: 204
Joined: Thu Jun 24, 2010 12:13 pm
14
Current bike(s): 1997 Voyager 1200
2016 Honda Goldwing
Location: Roseboro, North Carolina
Has liked: 7 times
Been liked: 41 times

Wheel bearings??

Post by usmalenurse »

003.jpg
Trying to figure out what these are. They were in a bag in a box of spare parts that came with my bike when I bought it. No label on the bag or parts numbers and just trying to figure out what they are for sure. Is it a set of front and rear wheel bearings or am I way off base?? Gonna replace my front tire in a few weeks and just figured if they were wheel bearings I'd change them out. ???
Charles Hairr
1997 Voyager XII
2016 Honda Goldwing
cushman eagle
King of the Road
King of the Road
Posts: 1983
Joined: Sat Jan 22, 2011 10:08 pm
13
Current bike(s): '99 Kawasaki Voyager 1200
1958 Cushman Eagle restoration has been finished,and have put 3030 miles on her!
Location: Orrville,Ohio
Has liked: 854 times
Been liked: 290 times

Re: Wheel bearings??

Post by cushman eagle »

They certainly look like wheel bearings,when you get a wheel off,see if they are the right dimensions.If they are change them out. :corn:
'99 Voyager VXII,'58 Cushman Eagle
User avatar
Highway Rider
Webmaster
Webmaster
Posts: 852
Joined: Sat Mar 22, 2008 12:19 pm
16
Current bike(s): 2003 ZG1200 Voyager
2006 VN900
1978 KZ650 D1 SR
Has liked: 138 times
Been liked: 39 times

Re: Wheel bearings??

Post by Highway Rider »

Any markings on the sides of the bearings?
Webmaster
Jim & Karol
2003 Voyager XII
IBA #57976
IBA 1500 miles in 24 hours
IBA 1500 miles in 36 hours
IBA 1000 miles in 24 hours
It's not the destination, It's the ride
User avatar
usmalenurse
Traveler
Traveler
Posts: 204
Joined: Thu Jun 24, 2010 12:13 pm
14
Current bike(s): 1997 Voyager 1200
2016 Honda Goldwing
Location: Roseboro, North Carolina
Has liked: 7 times
Been liked: 41 times

Re: Wheel bearings??

Post by usmalenurse »

Didn't think there were any markings but after I took them out of the bag there are markings on the black plastic. The smaller on is 5302RS and the larger on is 5304RS. Maybe they are an aftermarket bearing but I don't think those are Kawa numbers but not sure. Will find out when I pull the wheel I guess..
Thanks for the responses and sorry it took so long to respond...don't get on much anymore. :-(
Charles Hairr
1997 Voyager XII
2016 Honda Goldwing
User avatar
Highway Rider
Webmaster
Webmaster
Posts: 852
Joined: Sat Mar 22, 2008 12:19 pm
16
Current bike(s): 2003 ZG1200 Voyager
2006 VN900
1978 KZ650 D1 SR
Has liked: 138 times
Been liked: 39 times

Re: Wheel bearings??

Post by Highway Rider »

I don't think that the bearing you have are the proper size . The front bearing is supposed to be a 6302 and the rears are supposed to be a 6304 the letter s following will mean type of seal and whether is sealed on one side or both. Double check and make sure what you see is a 5 it could be a 6
Webmaster
Jim & Karol
2003 Voyager XII
IBA #57976
IBA 1500 miles in 24 hours
IBA 1500 miles in 36 hours
IBA 1000 miles in 24 hours
It's not the destination, It's the ride
Post Reply

Return to “Tech Tips - Voyager XII (1200 Four)”