Back to work on 93
Moderators: the2knights, Highway Rider
-
- Traveler
- Posts: 186
- Joined: Thu Nov 07, 2013 6:45 am
- 11
- Current bike(s): 2013 vstar 650
99 shadow 1100
93 voyager 1200 - Has liked: 1 time
- Been liked: 15 times
Back to work on 93
I sold the 84 1300. It was just too hard to get parts and was missing the trunk,sidecovers and saddlebags.the parts cost too much. My 93 was all busted up and i removed the trunk,saddlebags, and saddlebag cages. A guy wants them. I will have just the uppermost parts of the fairing.there are too many wires to remove and trace down to remove all the stuff under the fairing.my bike runs even with tons of stuff disconnected. It will probably take a few months to get this project roadworthy.
- Heavy Armor
- Cruiser
- Posts: 89
- Joined: Sun Jan 16, 2022 4:26 am
- 2
- Current bike(s): 2001 Voyager XII
- Has liked: 10 times
- Been liked: 25 times
-
- Traveler
- Posts: 186
- Joined: Thu Nov 07, 2013 6:45 am
- 11
- Current bike(s): 2013 vstar 650
99 shadow 1100
93 voyager 1200 - Has liked: 1 time
- Been liked: 15 times
Re: Back to work on 93
It looks like a tipover. The saddlebags and trunk were fine but up front the lower fairing pieces were busted,hanging by wires, the right dash console was hanging down, the underbelly fairing is cracked up.but theres too much to hide up front.luckily the fairing sides that house the signal lights are fine. The waste tank was off,laying on the ground.alll the rear wiring for brake tail and turn are a mess.