I'm thinking there must be some kind of trick that I'm not doing, it shouldn't be this difficult. The throttle closing cable will be easy peasy by comparison.Can't get throttle cable on the carb
Moderators: the2knights, Highway Rider
-
Vdriveboater
- Cruiser
- Posts: 53
- Joined: Sat Jun 17, 2023 2:55 am
- 1
- Current bike(s): 1996 Kawasaki Voyager XII
2007 Yamaha Royal Star Venture Midnight
2013 Suzuki V-Strom 650
2019 Suzuki RV200
1975 Yamaha RD200
1978 Yamaha DT175 - Location: Holland MI USA
- Has liked: 32 times
- Been liked: 18 times
Can't get throttle cable on the carb
Does anyone have a good way to get the "throttle opening" cable onto the carbs (I'm reinstalling them after inspection/cleaning)? I just spent an hour and a half trying to do this, with the throttle blades fully open and without first installing the airbox, and I can't get it in there. I'm thinking there must be some kind of trick that I'm not doing, it shouldn't be this difficult. The throttle closing cable will be easy peasy by comparison.
I'm thinking there must be some kind of trick that I'm not doing, it shouldn't be this difficult. The throttle closing cable will be easy peasy by comparison.-
VoyKimmer
- Grand Tourer
- Posts: 523
- Joined: Mon Mar 03, 2008 12:47 am
- 16
- Current bike(s): 2002 Voyager XII
1996 Voyager XII - Location: Gurnee, Illinois
- Has liked: 0
- Been liked: 102 times
Re: Can't get throttle cable on the carb
Surgical hemostat to hold and stretch cable in.
- These users liked VoyKimmer's post:
- Vdriveboater (Mon Jul 29, 2024 1:59 pm) • Nails (Mon Jul 29, 2024 6:01 pm)
- Rating: 22.22%