new darksider on the road
Moderators: the2knights, Highway Rider
-
- Streetster
- Posts: 18
- Joined: Sun Aug 28, 2011 1:06 am
- 13
- Current bike(s): 91 Kaw Voyager
81 Kaw GPZ 1100
71 Kaw 350 Avenger
83 Honda CX650C - Location: Sioux City, Iowa
- Has liked: 0
- Been liked: 0
new darksider on the road
Hi guys!!
I posted a while back that i had bought a Nexen C/T that i was going to put on myXII. i had the tire installed on the rim last week.. finally found some moly 60 grease at the local Honda dealership. I thourghly greased the drive splinesa and pulled the gear unit and greased the shaft splines also. I installed a new set of brake pads and reinstalled the rear wheel. It wasnt a bad job, just alot of bolts to get the rear back on the bike... I took it out today on it's maiden voyage.. about 30 miles. The 1st thing i noticed is that u dont have to force it into a turn, a lil body english and a gentle push and it glides right into the turn :).. It runs alot quieter than the worn EII that was on previously. The C/T soaked up the rough joints in the pavement way better than the bike tire ever did! Cornering seems very stable with 1 or 2 people on the bike. I did notice one thing, on rain grooves the frt tire semms to track the grooves and the C/t doesnt... not a bad thing .. but noticeable. I have a new E3 that i need to get mounted on the front, that may help that issue. I also have new prog front springs and seals to install this week. I figure i may as well just finish it all off so i ordered a set of Prog 412 hd shocks for the rear... the rear shocks have lost alot of its dampening.. wallows in the corners a bit too much for my liking. We are taking off around the 1st of Sept for a trip to Glacier Natl Park... hopefully it will be in tip top shape for the trip! Ride Safe ... Mike
I posted a while back that i had bought a Nexen C/T that i was going to put on myXII. i had the tire installed on the rim last week.. finally found some moly 60 grease at the local Honda dealership. I thourghly greased the drive splinesa and pulled the gear unit and greased the shaft splines also. I installed a new set of brake pads and reinstalled the rear wheel. It wasnt a bad job, just alot of bolts to get the rear back on the bike... I took it out today on it's maiden voyage.. about 30 miles. The 1st thing i noticed is that u dont have to force it into a turn, a lil body english and a gentle push and it glides right into the turn :).. It runs alot quieter than the worn EII that was on previously. The C/T soaked up the rough joints in the pavement way better than the bike tire ever did! Cornering seems very stable with 1 or 2 people on the bike. I did notice one thing, on rain grooves the frt tire semms to track the grooves and the C/t doesnt... not a bad thing .. but noticeable. I have a new E3 that i need to get mounted on the front, that may help that issue. I also have new prog front springs and seals to install this week. I figure i may as well just finish it all off so i ordered a set of Prog 412 hd shocks for the rear... the rear shocks have lost alot of its dampening.. wallows in the corners a bit too much for my liking. We are taking off around the 1st of Sept for a trip to Glacier Natl Park... hopefully it will be in tip top shape for the trip! Ride Safe ... Mike
- debron
- Past Board Member
- Posts: 1087
- Joined: Mon Aug 23, 2010 5:54 pm
- 14
- Current bike(s): 1995 Voyager XII
- Location: Stayton, Oregon (Close to)
- Has liked: 0
- Been liked: 1 time
Re: new darksider on the road
Thanks for the report, Mike! ![Thumbs Up :thmup:](./images/smilies/thumbup.gif)
![Thumbs Up :thmup:](./images/smilies/thumbup.gif)
Ron in Oregon
AVA Webmaster ("master" is optimistic!)
AVA Board Member
1995 Voyager XII
![Image](http://i1191.photobucket.com/albums/z472/debron11103/Voyager/RononXII_zps546b91d5.jpg)
AVA Webmaster ("master" is optimistic!)
AVA Board Member
1995 Voyager XII
![Image](http://i1191.photobucket.com/albums/z472/debron11103/Voyager/RononXII_zps546b91d5.jpg)
-
- Streetster
- Posts: 18
- Joined: Sun Aug 28, 2011 1:06 am
- 13
- Current bike(s): 91 Kaw Voyager
81 Kaw GPZ 1100
71 Kaw 350 Avenger
83 Honda CX650C - Location: Sioux City, Iowa
- Has liked: 0
- Been liked: 0
Re: new darksider on the road
Hi guys
i'd still like to hear from any of you that have pulled a trailer with a car tire... any feedback would be great!!
i'd still like to hear from any of you that have pulled a trailer with a car tire... any feedback would be great!!
- CarbJetKits
- Newbie
- Posts: 6
- Joined: Mon Jul 16, 2012 6:35 pm
- 12
- Current bike(s): Voyager XII 2000
- Location: Florida
- Has liked: 0
- Been liked: 0
- Contact:
Re: new darksider on the road
Hi Mike,
How hard was it to get the MT off and the CT on?
I am in the process of going dark on my triked Xii
How hard was it to get the MT off and the CT on?
I am in the process of going dark on my triked Xii
-
- Streetster
- Posts: 18
- Joined: Sun Aug 28, 2011 1:06 am
- 13
- Current bike(s): 91 Kaw Voyager
81 Kaw GPZ 1100
71 Kaw 350 Avenger
83 Honda CX650C - Location: Sioux City, Iowa
- Has liked: 0
- Been liked: 0
Re: new darksider on the road
i have a good friend that owns a bike repair that owed me a favor... he said it was a piece of cake seated on the rim w/o too much pressure
- gearheadfla
- Grand Tourer
- Posts: 563
- Joined: Sat Jan 08, 2011 5:29 pm
- 14
- Current bike(s): 1988 Voyager XII
1989 Voyager XII
2001 Voyager XII
2007 Vulcan Nomad
2006 Honda Rebel - Location: Port Saint Lucie, Florida
- Has liked: 0
- Been liked: 2 times
Re: new darksider on the road
You say that you feel like now you don't have to force it into a turn. The best way I can think of it is that it feels like it is on a rail now, do you agree? I've got about 1500 miles on it now and still love it, don't even cross my mind anymore, I just stick it in the turns and ride. ![Thumbs Up :thmup:](./images/smilies/thumbup.gif)
![Thumbs Up :thmup:](./images/smilies/thumbup.gif)
Jim in Fl. 88 XII
89 XII-parts bike-scraped
01 XII-sold
07 Vulcan Nomad
Patriot Guard Rider, Florida.
Sunshine State Voyagers
Veterans Nation Riding Association
89 XII-parts bike-scraped
01 XII-sold
07 Vulcan Nomad
Patriot Guard Rider, Florida.
Sunshine State Voyagers
Veterans Nation Riding Association
-
- Streetster
- Posts: 18
- Joined: Sun Aug 28, 2011 1:06 am
- 13
- Current bike(s): 91 Kaw Voyager
81 Kaw GPZ 1100
71 Kaw 350 Avenger
83 Honda CX650C - Location: Sioux City, Iowa
- Has liked: 0
- Been liked: 0
Re: new darksider on the road
it definately feels differant starting a turn... it's not that i had to force it before, it is just easier now.. differant u agree?
- gearheadfla
- Grand Tourer
- Posts: 563
- Joined: Sat Jan 08, 2011 5:29 pm
- 14
- Current bike(s): 1988 Voyager XII
1989 Voyager XII
2001 Voyager XII
2007 Vulcan Nomad
2006 Honda Rebel - Location: Port Saint Lucie, Florida
- Has liked: 0
- Been liked: 2 times
Re: new darksider on the road
100%bikermike wrote:it definately feels differant starting a turn... it's not that i had to force it before, it is just easier now.. differant u agree?
Jim in Fl. 88 XII
89 XII-parts bike-scraped
01 XII-sold
07 Vulcan Nomad
Patriot Guard Rider, Florida.
Sunshine State Voyagers
Veterans Nation Riding Association
89 XII-parts bike-scraped
01 XII-sold
07 Vulcan Nomad
Patriot Guard Rider, Florida.
Sunshine State Voyagers
Veterans Nation Riding Association
-
- Cruiser
- Posts: 55
- Joined: Fri Apr 15, 2011 9:32 am
- 13
- Current bike(s): 2002 Kawasaki Voyager XII
2002 Honda Shadow A.C.E
2002 Honda VTX 1300
2000 1100 V-Star Classic
1983 Honda V-65 Magna - Location: Salisbury,Ma
- Has liked: 0
- Been liked: 0
Re: new darksider on the road
it just feels better, more solid...
I have shaved more metal off my pegs with the CT, then I ever did with the MC..
Glad to see you are enjoying your CT.. I will soon be hitting 10k on mine and I plan on giving a review with pictures of the tire before and after..
I have shaved more metal off my pegs with the CT, then I ever did with the MC..
Glad to see you are enjoying your CT.. I will soon be hitting 10k on mine and I plan on giving a review with pictures of the tire before and after..