Installing an aftermarket radio
Moderators: the2knights, Highway Rider
-
- Newbie
- Posts: 3
- Joined: Sat Aug 09, 2014 7:42 pm
- 10
- Current bike(s): 1984 Voyager 1300
- Location: Griffin
- Has liked: 0
- Been liked: 0
Installing an aftermarket radio
I'm trying to find out how hard is it to install an aftermarket radio on the 84 voyager.I will appreciate any help
- Me Again
- King of the Road
- Posts: 1788
- Joined: Sun Feb 24, 2008 4:27 am
- 16
- Current bike(s): 1988 1300 Voyager
- Location: Wisconsin
- Has liked: 0
- Been liked: 262 times
Re: Installing an aftermarket radio
The problem with adding an after market radio is you loose hand controls.intercom and CB .If the tape-deck works you would be better of buying one of those adapters and go with that instead.
Bill
Bill
-
- Newbie
- Posts: 3
- Joined: Sat Aug 09, 2014 7:42 pm
- 10
- Current bike(s): 1984 Voyager 1300
- Location: Griffin
- Has liked: 0
- Been liked: 0
Re: Installing an aftermarket radio
I thought of that and am going to just send the radio off to be repaired and use my tape deck till then thanks
- Me Again
- King of the Road
- Posts: 1788
- Joined: Sun Feb 24, 2008 4:27 am
- 16
- Current bike(s): 1988 1300 Voyager
- Location: Wisconsin
- Has liked: 0
- Been liked: 262 times
Re: Installing an aftermarket radio
Depending on why you need it fixed ,you may be better off going on fleabay and buy a new controller .just remember to change locks before you snap it in place.
Also on a 1300 the connectors under the control have been known to come loose ,so check that first.
Also on a 1300 the connectors under the control have been known to come loose ,so check that first.