Alternator amperage?

Got a tech tip for Voyager 12's from your personal experiences, or one complete with pictures and instructions, here's where to post it. You can also ask about tips or procedures here.

Moderators: the2knights, Highway Rider

Post Reply
User avatar
shesseltine86
Cruiser
Cruiser
Posts: 41
Joined: Sun Mar 27, 2016 1:12 am
8
Current bike(s): 1986 Voyager 1200 XII
Has liked: 0
Been liked: 0

Alternator amperage?

Post by shesseltine86 »

I have a 86 1200 Voyager XII I am cleaning up and replacing the starter clutch. It had a set of Driving lights on the engine guard. No other accessories, but I was thinking of wiring in a power out to charge little things like an IPod or cell phone. Any issues with the stock alternator?
Glad to be riding again!
Previous bikes: 01 Harley FXDX
98 Suzuki Bandit 1200
01 Suzuki Bandit 600
85 Suzuki 850
76 Yamaha 360
User avatar
Tim in NC
Cruiser
Cruiser
Posts: 59
Joined: Wed Mar 30, 2016 8:50 pm
8
Current bike(s): 1996 Voyager XII
1976 KZ900 LTD
Location: Greensboro, NC
Has liked: 0
Been liked: 0

Re: Alternator amperage?

Post by Tim in NC »

The manual says it puts out 35A at 7,500 RPM. Charging amperage is 19A at 4,000 rpm. So when the alternator was new, it was supplying about 19A when cruising. I don't know if alternator performance degrades over time, but after 30 years, you may not be getting 19A. I've never seen a list of the electrical components, and how much current they draw, but that would me useful. Then you could see how much of your current budget is left for add-ons.
User avatar
shesseltine86
Cruiser
Cruiser
Posts: 41
Joined: Sun Mar 27, 2016 1:12 am
8
Current bike(s): 1986 Voyager 1200 XII
Has liked: 0
Been liked: 0

Re: Alternator amperage?

Post by shesseltine86 »

Thanks, also what octane rating fuel should I put in an 86?
Glad to be riding again!
Previous bikes: 01 Harley FXDX
98 Suzuki Bandit 1200
01 Suzuki Bandit 600
85 Suzuki 850
76 Yamaha 360
cushman eagle
King of the Road
King of the Road
Posts: 1983
Joined: Sat Jan 22, 2011 10:08 pm
13
Current bike(s): '99 Kawasaki Voyager 1200
1958 Cushman Eagle restoration has been finished,and have put 3030 miles on her!
Location: Orrville,Ohio
Has liked: 854 times
Been liked: 290 times

Re: Alternator amperage?

Post by cushman eagle »

I get along great with 87 octane on my '99, :thmup: should be the same on your '86.Now the GS1100GK that I had just before ,not so much.When it was hot,I had to be gentle on the throttle below 5000 rpms with 93 octane,or it would rattle. :corn:
'99 Voyager VXII,'58 Cushman Eagle
User avatar
shesseltine86
Cruiser
Cruiser
Posts: 41
Joined: Sun Mar 27, 2016 1:12 am
8
Current bike(s): 1986 Voyager 1200 XII
Has liked: 0
Been liked: 0

Re: Alternator amperage?

Post by shesseltine86 »

cushman eagle wrote:I get along great with 87 octane on my '99, :thmup: should be the same on your '86.Now the GS1100GK that I had just before ,not so much.When it was hot,I had to be gentle on the throttle below 5000 rpms with 93 octane,or it would rattle. :corn:
Thanks again!
Glad to be riding again!
Previous bikes: 01 Harley FXDX
98 Suzuki Bandit 1200
01 Suzuki Bandit 600
85 Suzuki 850
76 Yamaha 360
User avatar
krasmu
Grand Tourer
Grand Tourer
Posts: 404
Joined: Thu Sep 24, 2015 3:00 pm
9
Current bike(s): 1990 Voyager Xii (zg1200)
Location: Machesney Park, Illinois
Has liked: 0
Been liked: 18 times

Re: Alternator amperage?

Post by krasmu »

you'll find a lot of us here have done a complete bike LED conversion. There are plenty of benefits to it, brighter, last longer, burn cooler but also they use much less energy and help with the limited amperage of the alternator output. I'ved added charge ports and several sets of accent lights plus running lights and not having an issue.
Kirk Rasmussen
Machesney Park, Illinois

"Failure is unimportant. It takes courage to make a fool of yourself."-Charles Chaplin
User avatar
Tim in NC
Cruiser
Cruiser
Posts: 59
Joined: Wed Mar 30, 2016 8:50 pm
8
Current bike(s): 1996 Voyager XII
1976 KZ900 LTD
Location: Greensboro, NC
Has liked: 0
Been liked: 0

Re: Alternator amperage?

Post by Tim in NC »

I've been combing through some old posts on this forum; some good information on LED conversion. Some thoughtful people have listed the bulb numbers to make buying the LED replacements easy. I have no idea how much juice my bike draws when running. But reducing the electrical load with more efficient LEDs makes sense.
Post Reply

Return to “Tech Tips - Voyager XII (1200 Four)”