center stand

This is for general posts and questions concerning only the Voyager XII (1200cc, Four-cylinder) Years 1986 thru 2003.

Moderators: the2knights, Highway Rider

User avatar
Nails
King of the Road
King of the Road
Posts: 1771
Joined: Thu Feb 16, 2017 4:37 pm
7
Current bike(s): '97 XII
'00 XT350
'85 KLR 250
'82 Silverwing Sushiguzzi
Location: New Mexico Rockies
Has liked: 228 times
Been liked: 602 times

Re: center stand

Post by Nails »

VoyKimmer wrote:First stage lever is welded on the inside of the left foot. They get water in them and rust off.
Okay, mine just showed up, and I see exactly what you're talking about. Somebody who doesn't know how to weld did a lame repair on that lever, but can be made serviceable. Might even look okay with some paint -- mostly greasy junk right now.

Clever little rascal, using just one spring. And I'm surprised how light it is -- no clear benefit to dumping it off the bike. Pretty sure my one-piece stand is cast.

For sale: one heavy single-stage centerstand that doesn't work at all without a big freekin' hassle.
--
Nails
User avatar
Scott-(Altoona, PA)
King of the Road
King of the Road
Posts: 1085
Joined: Mon Feb 18, 2008 1:22 pm
16
Current bike(s): 2001 Voyager XII
Location: Altoona, PA
Has liked: 83 times
Been liked: 140 times
Contact:

Re: center stand

Post by Scott-(Altoona, PA) »

Nails wrote:
VoyKimmer wrote:......For sale: one heavy single-stage centerstand that doesn't work at all without a big freekin' hassle.
Nails, I believe that's what is more commonly referred to as a Paper Weight. Great for holding a repair manual open so the breeze doesn't change pages on you in the garage! :lol: :laughing: :rolling:
Mid-Atlantic Voyagers chapter secretary {"scribe"}
2001 Voyager XII
We may not know them all, but we owe them all! Thank a Veteran today!
User avatar
Nails
King of the Road
King of the Road
Posts: 1771
Joined: Thu Feb 16, 2017 4:37 pm
7
Current bike(s): '97 XII
'00 XT350
'85 KLR 250
'82 Silverwing Sushiguzzi
Location: New Mexico Rockies
Has liked: 228 times
Been liked: 602 times

Re: center stand

Post by Nails »

I'm morally conflicted here. The single-stage ones apparently sell for a couple bucks more than the one's that actually work. Should I sell it?
(Well, honestly not worth the hassle anyway.)
--
Nails
User avatar
cranky
King of the Road
King of the Road
Posts: 1037
Joined: Wed Jul 06, 2016 12:36 am
8
Current bike(s): 2003 Voyager
Location: San Jose, KalEfornYa
Has liked: 303 times
Been liked: 80 times

Re: center stand

Post by cranky »

... Holy Farglesnot!!! You got that new one to work????!!!!! Inquiring minds...
'03 Voyager - http://tinyurl.com/mqtgpwp VROC pics of Gina
Cranky - Bill Snodgrass AVA # 6544. VROC # 16804
Cranked >128K miles, Mtn bike-no motor!!!
San Jose, KalEfornYa
User avatar
Thud300
Traveler
Traveler
Posts: 130
Joined: Thu Oct 01, 2015 12:51 am
9
Current bike(s): 1991 Kawasaki Voyager XII
1998 Kawasaki Concours
1989 Kawasaki 454 LTD
Location: Decatur, IL
Has liked: 1 time
Been liked: 1 time
Contact:

Re: center stand

Post by Thud300 »

The Voyager XII two stage stand works great with a copious amount of...

LUBE.

Lube, lube, lube. :-D

Seriously, get your squirt can of 30wt oil, shoot the pivots, let it work in and be amazed at how much easier it is to use. The center stand lives in the grit zone, so frequent oiling is a good idea. One wet ride can wash out the lube and fill the pivots with grit, resulting in a dry mechanism trying to lift the bike (The MOM recommends 30 wt oil, IIRC)

I had to replace the stand on my 91 cause the one it came with was trash. Paint, lube, install, bazinga. In fact it's on the stand now still awaiting rearset reassembly. First thing I did was to oil er up, then pop, up she went.
Returning neglected Kawasakis to glory since 2014
1991 Voyager XII "Xaviera"
1998 Concours "Connimus Prime"
1989 454 LTD "Merlin"
User avatar
Nails
King of the Road
King of the Road
Posts: 1771
Joined: Thu Feb 16, 2017 4:37 pm
7
Current bike(s): '97 XII
'00 XT350
'85 KLR 250
'82 Silverwing Sushiguzzi
Location: New Mexico Rockies
Has liked: 228 times
Been liked: 602 times

Re: center stand

Post by Nails »

I can't figure out what that Nails weeny is whining about. It goes up on the center stand super easy. :gig:
--
Nails
User avatar
cranky
King of the Road
King of the Road
Posts: 1037
Joined: Wed Jul 06, 2016 12:36 am
8
Current bike(s): 2003 Voyager
Location: San Jose, KalEfornYa
Has liked: 303 times
Been liked: 80 times

Re: center stand

Post by cranky »

..IF... we ever meet, I'm gonna give you a challenge with mine!!!! GBG
HELLO Weenie!!!!
'03 Voyager - http://tinyurl.com/mqtgpwp VROC pics of Gina
Cranky - Bill Snodgrass AVA # 6544. VROC # 16804
Cranked >128K miles, Mtn bike-no motor!!!
San Jose, KalEfornYa
User avatar
Nails
King of the Road
King of the Road
Posts: 1771
Joined: Thu Feb 16, 2017 4:37 pm
7
Current bike(s): '97 XII
'00 XT350
'85 KLR 250
'82 Silverwing Sushiguzzi
Location: New Mexico Rockies
Has liked: 228 times
Been liked: 602 times

Re: center stand

Post by Nails »

Cranky, which part fails, getting the feet on the ground or jacking it up? Is it rusted? (I thought about putting in zerks but blew it off.)
--
Nails
User avatar
cranky
King of the Road
King of the Road
Posts: 1037
Joined: Wed Jul 06, 2016 12:36 am
8
Current bike(s): 2003 Voyager
Location: San Jose, KalEfornYa
Has liked: 303 times
Been liked: 80 times

Re: center stand

Post by cranky »

... jacking it up, putting the feet down is easy, they don't even touch...
I squirted the entire thing with Tri-Flo synthetic oil, it move easily..
I have Progressive front springs, but couldn't use it before... I'll
just chalk it to being old and pheeble... GBG
'03 Voyager - http://tinyurl.com/mqtgpwp VROC pics of Gina
Cranky - Bill Snodgrass AVA # 6544. VROC # 16804
Cranked >128K miles, Mtn bike-no motor!!!
San Jose, KalEfornYa
User avatar
Nails
King of the Road
King of the Road
Posts: 1771
Joined: Thu Feb 16, 2017 4:37 pm
7
Current bike(s): '97 XII
'00 XT350
'85 KLR 250
'82 Silverwing Sushiguzzi
Location: New Mexico Rockies
Has liked: 228 times
Been liked: 602 times

Re: center stand

Post by Nails »

Well, that was the harder part. In all of my experience -- I've used the two-stage unit exactly once. I also have Progressives and a seemingly tall MT66 rear tire. My feet also were just above the ground, but maybe close enough to actually hold the bike up. And I've removed the trunk (a new mod -- stay tuned).

I hate to fess up to this, but I actually had the two-stage stand all along. I didn't notice that the "first-stage" foot lever was entirely gone, and I had no clue that the two-stage pup existed. I can report that it's possible to put it up without putting the feet down down first. But it's a bitch.

On the plus side, now I know what shape to weld in that hole -- the one I really should've noticed in the first place. And it went on a lot easier, just having to swap the bottom part. (I also have a service pit, and I could pull boards out from underneath the bike to get down there.)

Mine welded up well, despite the rust, I poured into the pipe lever that crap that turns rust black, and painted the whole thing with primer, top coat, and bed liner. I also put sealant on the plastic end cap. It's definitely the first rust casualty on these bikes.

Another thing fixed ... that I didn't even know was busted.
--
Nails
User avatar
Mr Jensee
King of the Road
King of the Road
Posts: 1987
Joined: Fri Dec 26, 2008 5:55 pm
15
Current bike(s): Phone 337-781-8158
Home Phone disconnected.
Previous bikes. Yamaha 180, Honda CM200T, Suzuki 1000LNKawasaki ZRX1100.
Location: Lafayette, La
Has liked: 0
Been liked: 9 times

Re: center stand

Post by Mr Jensee »

Nails you old stand is scrap metal. Period.
For Voyager XII Manuals click the link below.
https://1drv.ms/f/s!Ao3K0Ai2gvglgS3l7J4pBJrjfBhc
User avatar
Nails
King of the Road
King of the Road
Posts: 1771
Joined: Thu Feb 16, 2017 4:37 pm
7
Current bike(s): '97 XII
'00 XT350
'85 KLR 250
'82 Silverwing Sushiguzzi
Location: New Mexico Rockies
Has liked: 228 times
Been liked: 602 times

Re: center stand

Post by Nails »

It isn't really any worse than the one I just put on..
--
Nails
jengstrom
Newbie
Newbie
Posts: 4
Joined: Sat Jul 08, 2017 2:31 am
7
Current bike(s): 1995 Voyager Xii
Location: Rochester NY
Has liked: 0
Been liked: 1 time

Re: center stand

Post by jengstrom »

The guy I bought mine from taught me about the 2 stage stand and also warned me that the first stage was missing the lever. I can get my toe to grab the first stage just fine. So that is my bike's normal.

These bikes are wonderful. Now that I've had mine for 2 years, I don't think I ever want anything else. As long as it stays reliable and I can still get parts when I need them, I'm hooked.

John
Post Reply

Return to “General - Voyager XII (1200 Four)”