De-Rusting A Voyager XII

Got a tech tip for Voyager 12's from your personal experiences, or one complete with pictures and instructions, here's where to post it. You can also ask about tips or procedures here.

Moderators: the2knights, Highway Rider

Post Reply
User avatar
bikerking.biz
Traveler
Traveler
Posts: 213
Joined: Tue Jun 17, 2008 5:33 am
16
Current bike(s): 1988 Kawasaki Voyager XII
1970 Honda CL 350
Location: PA
Has liked: 1 time
Been liked: 2 times
Contact:

Re: De-Rusting A Voyager XII

Post by bikerking.biz »

No, the Voyagers are not prone to rust, it sounds like a PO either didn't care much, or it was subject to a lot of moisure or salt air. Could have been stored outside with a plastic cover over it too which is not good.
Biker King
http://www.bikerking.biz
Check out our huge & redesigned website, which is now your POWER BROKER & "KING of Everything Motorcycle & More"! "Like" our FB page for FB only discounts & more.
User avatar
biggersm
Traveler
Traveler
Posts: 208
Joined: Sun Feb 17, 2008 11:27 pm
16
Current bike(s): 2008 Goldwing Airbag
2000 Voyager XII
1998 Suzuki Intruder 1500
1989 Honda PC 800
1982 Yamaha Maxim 750
1993 Yamaha Seca 600
1981 Yamaha XV920 (part 2)
1981 Yamaha XV920 (part 1)
Location: Melbourne Florida
Has liked: 0
Been liked: 0

Re: De-Rusting A Voyager XII

Post by biggersm »

The area that I always get rust is on the rear speaker grills, chrome on the fork slider tubes, antenna, and on some of the chrome fittings. Usually my bike is exposed to salt air for 9-10 hours about twice a week when parked on PAFB. 0000 Steel wool does wonders but it only stays clean for a month or so.

Did you ever get an e-mail from me? Do you want the rest of the shop manuals? Did you buy the bike from a guy named Wray? Do you want to be added to the SSV roster?

So many questions for so late at night.
Mike and Marcia Biggerstaff

Melbourne FL

Thanks to the Interstate Highway System, it is now possible to travel from coast to coast without seeing anything. Charles Kuralt
User avatar
DaveC
Has liked: 0
Been liked: 0

Re: De-Rusting A Voyager XII

Post by DaveC »

It has been three months, how is the de-rusting working out. Did you ever clear coat the effected areas?
I use a gloss clear coat over those parts not subject to extreme heating conditions. Works well on the inlet tube of the cooling system.
Post Reply

Return to “Tech Tips - Voyager XII (1200 Four)”