Hello,
I need to replace the radio antennae cable. What's the best way to access? How much fairing needs to come off? (Right side).
Thanks in advance.
Replacing antennae cable - How to access
Moderators: the2knights, Highway Rider
- Mr Jensee
- King of the Road
- Posts: 1987
- Joined: Fri Dec 26, 2008 5:55 pm
- 15
- Current bike(s): Phone 337-781-8158
Home Phone disconnected.
Previous bikes. Yamaha 180, Honda CM200T, Suzuki 1000LNKawasaki ZRX1100. - Location: Lafayette, La
- Has liked: 0
- Been liked: 9 times
Re: Replacing antennae cable - How to access
If you are asking where does the antenna plug into the radio there is a Motorola plug coming out of the back of the radio. To access everything easily you will have to remove the upper right faring. Start with the removal of the headlight bracket, headlight. Remove both mirrors, remove the windshield, remove the chrome strip below the windshield. Remove the right lower faring, then remove the upper right faring. You can then remove the dummy tank and trace the coax cable back to the antenna itself.
For Voyager XII Manuals click the link below.
https://1drv.ms/f/s!Ao3K0Ai2gvglgS3l7J4pBJrjfBhc
https://1drv.ms/f/s!Ao3K0Ai2gvglgS3l7J4pBJrjfBhc
-
- Streetster
- Posts: 18
- Joined: Tue Jun 16, 2009 2:51 pm
- 15
- Current bike(s): 1991 Kawasaki Voyager XII
- Has liked: 6 times
- Been liked: 0
Re: Replacing antennae cable - How to access
Mr. Jensee,
Thanks for the response.
I figured it was pretty involved.
When I do this, I will learn a whole lot more about my Voyager.
Thanks for the response.
I figured it was pretty involved.
When I do this, I will learn a whole lot more about my Voyager.