(I seem to be monopolizing the board )
Anyone know if Clutch and Throttle cables are available for an 86 ZN1300? I assume all models of ZN share the same cables? Also assuming new OEM cables are no longer avaible (with the exception of the odd set on Ebay). Is the only option Motion Pro?
Source for Throttle and Clutch Cables
Moderators: the2knights, Highway Rider
- Van Voyager
- Grand Tourer
- Posts: 435
- Joined: Wed Aug 30, 2017 8:01 am
- 7
- Current bike(s): 1986 Kawasaki ZN1300 Voyager
- Has liked: 46 times
- Been liked: 40 times
- Lucasind
- King of the Road
- Posts: 1790
- Joined: Mon Dec 17, 2012 5:44 pm
- 11
- Current bike(s): 2003 Voyager 1200
1988 Voyager 1200
1985 Voyager 1300
2008 Concourse 1400
1985 LTD 1100
1981 CSR 1000
1981 CSR 650
1979 KZ 650
1973 XL 350
1988 Eliminator
1975 CB 125
1965 S 65
and a bunch of parts ! - Location: Toledo, OH
- Has liked: 194 times
- Been liked: 69 times
Re: Source for Throttle and Clutch Cables
http://www.ebay.com/itm/NOS-Kawasaki-Ca ... sW&vxp=mtr
There are currently more new one ....and used ones on ebay than you could use in a lifetime !
There are currently more new one ....and used ones on ebay than you could use in a lifetime !
90% OF ANY JOB ...IS GETTING STARTED !
- trikebldr
- Elite Tourer
- Posts: 749
- Joined: Mon Sep 15, 2014 8:34 pm
- 10
- Current bike(s): '82 Kawasaki KZ750 Spectre
'82 Kawasaki KZ1100D Spectre
'84 Kawasaki Voyager 1300 with
'79 Vetter Terraplane sidecar
'85 Kawasaki Voyager 1300
2001 Kawasaki ZG1200 Voyager XII - Location: Independence, MO.
- Has liked: 0
- Been liked: 1 time
Re: Source for Throttle and Clutch Cables
The later models have cruise control and use different throttle cables than non-cruise models. I thought the '86 model year was when they started adding cruise control, but maybe not.
- Van Voyager
- Grand Tourer
- Posts: 435
- Joined: Wed Aug 30, 2017 8:01 am
- 7
- Current bike(s): 1986 Kawasaki ZN1300 Voyager
- Has liked: 46 times
- Been liked: 40 times
Re: Source for Throttle and Clutch Cables
I believe crusie was added in 87 & 88 models, no?
On a related question, it is possible to retrofit a factory cruise to a model that didn't come with it. I know the instrument cluster is slightly different (Cruise indicator), there's some kind of servo, some handlebar switches, different cables, different wiring harness.... Is the ECU different or are the cruise 'smarts' self contained?
On a related question, it is possible to retrofit a factory cruise to a model that didn't come with it. I know the instrument cluster is slightly different (Cruise indicator), there's some kind of servo, some handlebar switches, different cables, different wiring harness.... Is the ECU different or are the cruise 'smarts' self contained?
- Me Again
- King of the Road
- Posts: 1787
- Joined: Sun Feb 24, 2008 4:27 am
- 16
- Current bike(s): 1988 1300 Voyager
- Location: Wisconsin
- Has liked: 0
- Been liked: 262 times
Re: Source for Throttle and Clutch Cables
I am sure it would be possible to retrofit one but probably much easier to install a universal one .
I put one for an 80's ford in my first 1300 and have one sitting here awaiting installation now .
my problem is that my joints will not allow me to reach around and hook up some of the cables and wires needed ,so it may never get done .
The one I used tied into a coil and worked flawlessly .
I put one for an 80's ford in my first 1300 and have one sitting here awaiting installation now .
my problem is that my joints will not allow me to reach around and hook up some of the cables and wires needed ,so it may never get done .
The one I used tied into a coil and worked flawlessly .