In years past i did put a drivers backrest on my 93 kaw but i cannot not remember exactly the details. It was a used one and i got it at a flea market. I believe it came off a older Honda. Somehow i was able to get it to work. It had the chrome tubes that came up on the sides of the seat. No cutting of the seat with that version.
Anyone with pics or thoughts on this?
aftermarket drivers backrest for factory seat
Moderators: the2knights, Highway Rider
-
triton28
- King of the Road
- Posts: 1006
- Joined: Fri Aug 23, 2013 1:32 am
- 11
- Current bike(s): 1987 ZG-1200 B1
1987 ZG-1200 B1
1990 ZG-1200 B4 - Location: Nova Scotia Canada
- Has liked: 105 times
- Been liked: 272 times
Re: aftermarket drivers backrest for factory seat
look in the accessories listing of the Voyager XII Tech Center page, accessed from the AVA Home Page for a drivers backrest and you will see the Markland drivers backrest installation info with pictures of the actual unit itself. This is the most common one used.
-
4redjf
- Cruiser
- Posts: 62
- Joined: Mon Jun 03, 2024 10:27 am
- Current bike(s): 1996 Kawasaki Voyager XII
- Has liked: 70 times
- Been liked: 9 times
Re: aftermarket drivers backrest for factory seat
Thanks, i got a markland backrest but was hoping to find the mounting assemblies for it. Apparently when these are removed they leave the mounts on the bikes. I looked around here on AVA and couldnt find any. Before i think i used hose clamps and clamped the chrome arms to the pass handles.triton28 wrote: ↑Thu Sep 19, 2024 5:43 pm look in the accessories listing of the Voyager XII Tech Center page, accessed from the AVA Home Page for a drivers backrest and you will see the Markland drivers backrest installation info with pictures of the actual unit itself. This is the most common one used.
-
triton28
- King of the Road
- Posts: 1006
- Joined: Fri Aug 23, 2013 1:32 am
- 11
- Current bike(s): 1987 ZG-1200 B1
1987 ZG-1200 B1
1990 ZG-1200 B4 - Location: Nova Scotia Canada
- Has liked: 105 times
- Been liked: 272 times
Re: aftermarket drivers backrest for factory seat
occasionally they come up for sale on eBay when someone is breaking down a Voyager XII. Keep looking as I have seen them there sometimes mixed in with other body/chassis/fairing part lots. Not often but they do show up now and then.
-
4redjf
- Cruiser
- Posts: 62
- Joined: Mon Jun 03, 2024 10:27 am
- Current bike(s): 1996 Kawasaki Voyager XII
- Has liked: 70 times
- Been liked: 9 times
Re: aftermarket drivers backrest for factory seat
Thanks, yeah i been looking on ebay and around online. Still no luck finding them. For now i have used some clamps to hole the backrest frame to the pass handles. But would really like to get the proper setup.
I did notice when changing out the floorboards to the factory pegs, that the motor housing is almost setting on the frame. I did read about the engine mount bushings may need replaced. But the Manual doesnt show the bushings to buy and also doesn't show how to R & R them. From looking at it, it does appear to be a major job.