Partdiscounter Experience
Moderators: the2knights, Highway Rider
- glvnthedream
- Cruiser
- Posts: 65
- Joined: Fri Apr 21, 2023 8:06 pm
- 1
- Current bike(s): 2002 Kawasaki Voyager XII 1200
- Has liked: 46 times
- Been liked: 14 times
Partdiscounter Experience
I am searching for Brake discs for my 2002 Voyager and found https://partdiscounter.com/ with incredible prices for both front and back discs. Has anyone used this site in the past? If so, what was your experience? All my discs are at the minimum service limits and according to my cart I can get all 3 for &150 US Dollars.
On another note, has anyone found aftermarket brake calipers that can be used?
Thanks in advance
Regards
Greg
King George VA
On another note, has anyone found aftermarket brake calipers that can be used?
Thanks in advance
Regards
Greg
King George VA
- Van Voyager
- Grand Tourer
- Posts: 435
- Joined: Wed Aug 30, 2017 8:01 am
- 7
- Current bike(s): 1986 Kawasaki ZN1300 Voyager
- Has liked: 46 times
- Been liked: 40 times
Re: Partdiscounter Experience
Following ....
- These users liked Van Voyager's post:
- glvnthedream (Tue Oct 31, 2023 11:11 pm)
- Rating: 11.11%
- GrandpaDenny
- King of the Road
- Posts: 1079
- Joined: Fri Nov 01, 2019 4:24 pm
- 5
- Current bike(s): 1993 Kawasaki Vulcan 1500
- Has liked: 481 times
- Been liked: 436 times
Re: Partdiscounter Experience
I get EBC brakes from Amazon, organics are around $90 for all three calipers. Sintered metallics are just a little bit higher, maybe ten bucks, I didn't look.
- These users liked GrandpaDenny's post:
- glvnthedream (Wed Nov 01, 2023 5:19 pm)
- Rating: 11.11%
Dennis Fariello
Philadelphia, PA
2000 Voyager XII "Gertrude" - deceased
1993 Vulcan 88 "Emily"
South Jersey Retreads
Patriot Guard Riders
Warriors Watch Riders
VXII Manuals:
https://amervoyassoc.org/zg1200manuals.php
Philadelphia, PA
2000 Voyager XII "Gertrude" - deceased
1993 Vulcan 88 "Emily"
South Jersey Retreads
Patriot Guard Riders
Warriors Watch Riders
VXII Manuals:
https://amervoyassoc.org/zg1200manuals.php
- Nails
- King of the Road
- Posts: 1771
- Joined: Thu Feb 16, 2017 4:37 pm
- 7
- Current bike(s): '97 XII
'00 XT350
'85 KLR 250
'82 Silverwing Sushiguzzi - Location: New Mexico Rockies
- Has liked: 228 times
- Been liked: 602 times
Re: Partdiscounter Experience
I bought brakes and lines from Don. Work swell. https://www.amervoyassoc.org/forum/memb ... file&u=239
--
Nails
Nails
- Scott-(Altoona, PA)
- King of the Road
- Posts: 1086
- Joined: Mon Feb 18, 2008 1:22 pm
- 16
- Current bike(s): 2001 Voyager XII
- Location: Altoona, PA
- Has liked: 83 times
- Been liked: 140 times
- Contact:
Re: Partdiscounter Experience
Denny, I beleive he is talking about the rotors (disc's), not the brake pads.GrandpaDenny wrote: ↑Wed Nov 01, 2023 10:12 am I get EBC brakes from Amazon, organics are around $90 for all three calipers. Sintered metallics are just a little bit higher, maybe ten bucks, I didn't look.
- These users liked Scott-(Altoona, PA)'s post:
- Nails (Wed Nov 01, 2023 6:37 pm) • GrandpaDenny (Thu Nov 02, 2023 5:13 pm)
- Rating: 22.22%
Mid-Atlantic Voyagers chapter secretary {"scribe"}
2001 Voyager XII
We may not know them all, but we owe them all! Thank a Veteran today!
2001 Voyager XII
We may not know them all, but we owe them all! Thank a Veteran today!
- Scott-(Altoona, PA)
- King of the Road
- Posts: 1086
- Joined: Mon Feb 18, 2008 1:22 pm
- 16
- Current bike(s): 2001 Voyager XII
- Location: Altoona, PA
- Has liked: 83 times
- Been liked: 140 times
- Contact:
Re: Partdiscounter Experience
Greg, I know from my own experience when I was searching for a rear rotor/disc they get a bit pricy depending on the source. I would say $40 for each front and $70 for the rear isn't bad at all. Thanks for the tip!glvnthedream wrote: ↑Tue Oct 31, 2023 2:22 pm I am searching for Brake discs for my 2002 Voyager and found https://partdiscounter.com/ with incredible prices for both front and back discs. Has anyone used this site in the past? If so, what was your experience? All my discs are at the minimum service limits and according to my cart I can get all 3 for &150 US Dollars.
On another note, has anyone found aftermarket brake calipers that can be used?
Thanks in advance
Regards
Greg
King George VA
As for you question about aftermarket calipers, I'm pretty sure I've read somewhere on here that someone swapped out from one bike to another but not sure about aftermarket units. I'm sure someone makes one that fits. Keep us posted on your search/findings!
- These users liked Scott-(Altoona, PA)'s post:
- glvnthedream (Wed Nov 01, 2023 5:22 pm)
- Rating: 11.11%
Mid-Atlantic Voyagers chapter secretary {"scribe"}
2001 Voyager XII
We may not know them all, but we owe them all! Thank a Veteran today!
2001 Voyager XII
We may not know them all, but we owe them all! Thank a Veteran today!
- glvnthedream
- Cruiser
- Posts: 65
- Joined: Fri Apr 21, 2023 8:06 pm
- 1
- Current bike(s): 2002 Kawasaki Voyager XII 1200
- Has liked: 46 times
- Been liked: 14 times
Re: Partdiscounter Experience
Thanks. I have no problems finding pads, I am looking for NEW calipers and the discs (rotors). The prices I found on the partsdiscounter site are incredible compared to $100+ each which is what I am finding the norm.
GrandpaDenny wrote: ↑Wed Nov 01, 2023 10:12 am I get EBC brakes from Amazon, organics are around $90 for all three calipers. Sintered metallics are just a little bit higher, maybe ten bucks, I didn't look.
- glvnthedream
- Cruiser
- Posts: 65
- Joined: Fri Apr 21, 2023 8:06 pm
- 1
- Current bike(s): 2002 Kawasaki Voyager XII 1200
- Has liked: 46 times
- Been liked: 14 times
Re: Partdiscounter Experience
Thanks, Scott.
Yep, I am going to jump on the deal and will report my results r/discs. I was assured by the support on the site that they are exact fit. I will be continuing my search for the calipers
Cheers
Yep, I am going to jump on the deal and will report my results r/discs. I was assured by the support on the site that they are exact fit. I will be continuing my search for the calipers
Cheers
Scott-(Altoona, PA) wrote: ↑Wed Nov 01, 2023 2:45 pmGreg, I know from my own experience when I was searching for a rear rotor/disc they get a bit pricy depending on the source. I would say $40 for each front and $70 for the rear isn't bad at all. Thanks for the tip!glvnthedream wrote: ↑Tue Oct 31, 2023 2:22 pm I am searching for Brake discs for my 2002 Voyager and found https://partdiscounter.com/ with incredible prices for both front and back discs. Has anyone used this site in the past? If so, what was your experience? All my discs are at the minimum service limits and according to my cart I can get all 3 for &150 US Dollars.
On another note, has anyone found aftermarket brake calipers that can be used?
Thanks in advance
Regards
Greg
King George VA
As for you question about aftermarket calipers, I'm pretty sure I've read somewhere on here that someone swapped out from one bike to another but not sure about aftermarket units. I'm sure someone makes one that fits. Keep us posted on your search/findings!
- glvnthedream
- Cruiser
- Posts: 65
- Joined: Fri Apr 21, 2023 8:06 pm
- 1
- Current bike(s): 2002 Kawasaki Voyager XII 1200
- Has liked: 46 times
- Been liked: 14 times
Re: Partdiscounter Experience
I pulled the trigger on the discs. Partzilla has the REAR and FRONT Discs listed for $416.00 EACH.
- GrandpaDenny
- King of the Road
- Posts: 1079
- Joined: Fri Nov 01, 2019 4:24 pm
- 5
- Current bike(s): 1993 Kawasaki Vulcan 1500
- Has liked: 481 times
- Been liked: 436 times
Re: Partdiscounter Experience
Oh you are absolutely right. $150 for NEW discs, all three of them, is an astounding deal. One thing I wonder if at that price are they iron or stainless steel? OEM discs are stainless steel.Scott-(Altoona, PA) wrote: ↑Wed Nov 01, 2023 2:39 pmDenny, I beleive he is talking about the rotors (disc's), not the brake pads.GrandpaDenny wrote: ↑Wed Nov 01, 2023 10:12 am I get EBC brakes from Amazon, organics are around $90 for all three calipers. Sintered metallics are just a little bit higher, maybe ten bucks, I didn't look.
Dennis Fariello
Philadelphia, PA
2000 Voyager XII "Gertrude" - deceased
1993 Vulcan 88 "Emily"
South Jersey Retreads
Patriot Guard Riders
Warriors Watch Riders
VXII Manuals:
https://amervoyassoc.org/zg1200manuals.php
Philadelphia, PA
2000 Voyager XII "Gertrude" - deceased
1993 Vulcan 88 "Emily"
South Jersey Retreads
Patriot Guard Riders
Warriors Watch Riders
VXII Manuals:
https://amervoyassoc.org/zg1200manuals.php
- glvnthedream
- Cruiser
- Posts: 65
- Joined: Fri Apr 21, 2023 8:06 pm
- 1
- Current bike(s): 2002 Kawasaki Voyager XII 1200
- Has liked: 46 times
- Been liked: 14 times
Re: Partdiscounter Experience
Confirmed with support that they are Stainless Steel.
Have to give them Kudos for support too, along with the prices. They have been very responsive. Wish they had more XII Parts available.
Have to give them Kudos for support too, along with the prices. They have been very responsive. Wish they had more XII Parts available.
GrandpaDenny wrote: ↑Thu Nov 02, 2023 5:12 pmOh you are absolutely right. $150 for NEW discs, all three of them, is an astounding deal. One thing I wonder if at that price are they iron or stainless steel? OEM discs are stainless steel.Scott-(Altoona, PA) wrote: ↑Wed Nov 01, 2023 2:39 pmDenny, I beleive he is talking about the rotors (disc's), not the brake pads.GrandpaDenny wrote: ↑Wed Nov 01, 2023 10:12 am I get EBC brakes from Amazon, organics are around $90 for all three calipers. Sintered metallics are just a little bit higher, maybe ten bucks, I didn't look.
- These users liked glvnthedream's post:
- Scott-(Altoona, PA) (Fri Nov 03, 2023 12:52 pm) • cushman eagle (Sat Nov 04, 2023 12:10 am)
- Rating: 22.22%
- GrandpaDenny
- King of the Road
- Posts: 1079
- Joined: Fri Nov 01, 2019 4:24 pm
- 5
- Current bike(s): 1993 Kawasaki Vulcan 1500
- Has liked: 481 times
- Been liked: 436 times
Re: Partdiscounter Experience
Cool. Let us know how they work out!glvnthedream wrote: ↑Fri Nov 03, 2023 2:24 am Confirmed with support that they are Stainless Steel.
Have to give them Kudos for support too, along with the prices. They have been very responsive. Wish they had more XII Parts available.
- These users liked GrandpaDenny's post:
- glvnthedream (Fri Nov 03, 2023 3:15 pm) • Scott-(Altoona, PA) (Fri Nov 03, 2023 6:35 pm)
- Rating: 22.22%
Dennis Fariello
Philadelphia, PA
2000 Voyager XII "Gertrude" - deceased
1993 Vulcan 88 "Emily"
South Jersey Retreads
Patriot Guard Riders
Warriors Watch Riders
VXII Manuals:
https://amervoyassoc.org/zg1200manuals.php
Philadelphia, PA
2000 Voyager XII "Gertrude" - deceased
1993 Vulcan 88 "Emily"
South Jersey Retreads
Patriot Guard Riders
Warriors Watch Riders
VXII Manuals:
https://amervoyassoc.org/zg1200manuals.php
- glvnthedream
- Cruiser
- Posts: 65
- Joined: Fri Apr 21, 2023 8:06 pm
- 1
- Current bike(s): 2002 Kawasaki Voyager XII 1200
- Has liked: 46 times
- Been liked: 14 times
Re: Partdiscounter Experience
UPDATE: Posting just to give kudos to the website again. Submitted my order on November 1st. Today, November 4th they have arrived. I am in Virginia.
- These users liked glvnthedream's post:
- Stew (Sat Nov 04, 2023 7:26 pm) • cushman eagle (Sun Nov 05, 2023 12:09 am)
- Rating: 22.22%
- GrandpaDenny
- King of the Road
- Posts: 1079
- Joined: Fri Nov 01, 2019 4:24 pm
- 5
- Current bike(s): 1993 Kawasaki Vulcan 1500
- Has liked: 481 times
- Been liked: 436 times
Re: Partdiscounter Experience
They look raw to me, do they need to be cut? Never having seen brand-new rotors, I could easily be wrong, though.
Dennis Fariello
Philadelphia, PA
2000 Voyager XII "Gertrude" - deceased
1993 Vulcan 88 "Emily"
South Jersey Retreads
Patriot Guard Riders
Warriors Watch Riders
VXII Manuals:
https://amervoyassoc.org/zg1200manuals.php
Philadelphia, PA
2000 Voyager XII "Gertrude" - deceased
1993 Vulcan 88 "Emily"
South Jersey Retreads
Patriot Guard Riders
Warriors Watch Riders
VXII Manuals:
https://amervoyassoc.org/zg1200manuals.php
- glvnthedream
- Cruiser
- Posts: 65
- Joined: Fri Apr 21, 2023 8:06 pm
- 1
- Current bike(s): 2002 Kawasaki Voyager XII 1200
- Has liked: 46 times
- Been liked: 14 times
Re: Partdiscounter Experience
They are indeed Raw. Are there preps needed before installing and riding with them? Thanks in advance
GrandpaDenny wrote: ↑Sun Nov 05, 2023 12:28 am They look raw to me, do they need to be cut? Never having seen brand-new rotors, I could easily be wrong, though.
- Van Voyager
- Grand Tourer
- Posts: 435
- Joined: Wed Aug 30, 2017 8:01 am
- 7
- Current bike(s): 1986 Kawasaki ZN1300 Voyager
- Has liked: 46 times
- Been liked: 40 times
Re: Partdiscounter Experience
Clean with a high flash point solvent and sent it.glvnthedream wrote: ↑Sun Nov 05, 2023 4:07 pm They are indeed Raw. Are there preps needed before installing and riding with them? Thanks in advance
- glvnthedream
- Cruiser
- Posts: 65
- Joined: Fri Apr 21, 2023 8:06 pm
- 1
- Current bike(s): 2002 Kawasaki Voyager XII 1200
- Has liked: 46 times
- Been liked: 14 times
Re: Partdiscounter Experience
So clean well with brake cleaner and should be good??
Van Voyager wrote: ↑Sun Nov 05, 2023 7:18 pmClean with a high flash point solvent and sent it.glvnthedream wrote: ↑Sun Nov 05, 2023 4:07 pm They are indeed Raw. Are there preps needed before installing and riding with them? Thanks in advance
- Van Voyager
- Grand Tourer
- Posts: 435
- Joined: Wed Aug 30, 2017 8:01 am
- 7
- Current bike(s): 1986 Kawasaki ZN1300 Voyager
- Has liked: 46 times
- Been liked: 40 times
- VoyKimmer
- Grand Tourer
- Posts: 526
- Joined: Mon Mar 03, 2008 12:47 am
- 16
- Current bike(s): 2002 Voyager XII
1996 Voyager XII - Location: Gurnee, Illinois
- Has liked: 0
- Been liked: 104 times
Re: Partdiscounter Experience
All brands look like that new. My EBC’s looked like that before I chromed them and have worked good for several years.
- glvnthedream
- Cruiser
- Posts: 65
- Joined: Fri Apr 21, 2023 8:06 pm
- 1
- Current bike(s): 2002 Kawasaki Voyager XII 1200
- Has liked: 46 times
- Been liked: 14 times