Change speedometer cable still not working
Moderators: the2knights, Highway Rider
-
- Newbie
- Posts: 9
- Joined: Fri Mar 22, 2019 7:44 pm
- 5
- Current bike(s): 2003 Kawasaki Voyager 1200 XII
- Has liked: 7 times
- Been liked: 0
Re: Change speedometer cable still not working
I have a new dilemma. I changed out the inside piece that was broken greased and changed brake pads, put everything back together, and I noticed that when Turn the Front wheel Forward speedometer cable won’t turn, but when I turned the wheel backwards, the cable turns so my question is do I have something backwards? I didn’t think that I did because I put everything back the way it Came apart. Can somebody please tell me what I’m doing wrong thank you.
- Nails
- King of the Road
- Posts: 1771
- Joined: Thu Feb 16, 2017 4:37 pm
- 7
- Current bike(s): '97 XII
'00 XT350
'85 KLR 250
'82 Silverwing Sushiguzzi - Location: New Mexico Rockies
- Has liked: 228 times
- Been liked: 602 times
Re: Change speedometer cable still not working
Probably not sticking the inner cable in far enough. You usually have to turn it to line it up.
- These users liked Nails's post:
- cushman eagle (Fri Aug 23, 2024 12:13 am)
- Rating: 11.11%
--
Nails
Nails
- Scott-(Altoona, PA)
- King of the Road
- Posts: 1085
- Joined: Mon Feb 18, 2008 1:22 pm
- 16
- Current bike(s): 2001 Voyager XII
- Location: Altoona, PA
- Has liked: 83 times
- Been liked: 140 times
- Contact:
Re: Change speedometer cable still not working
I agree with Nails, it sounds like the inner cable isn't completely seated and when the handlebars turn it slips just enough to not engage. Just separate the cable at both ends (one at a time) and re-seat it. You should feel it slip into position.
Mid-Atlantic Voyagers chapter secretary {"scribe"}
2001 Voyager XII
We may not know them all, but we owe them all! Thank a Veteran today!
2001 Voyager XII
We may not know them all, but we owe them all! Thank a Veteran today!