Hi! I'm looking for a foot peg mount that will twist so the peg aims back at the driver... normal mounts are 90*
and leave your foot at an angle on...
Last post
Cranky, I hope they work out for you. We love them. Been using them since around 2008, on two different bikes. Affordable, and they work. They're not...
Ok was riding the bike this morning going around a corner with a small grove in it at 45-50 mph . The front end went into a wobble and I mean death...
Last post
Actually sold the bike explained to the new owner the problem . He has owned 4 voyagers and was very familiar with them . This was my second voyager...
Anyone near Nampa Idaho with experience replacing steering stem bearings & races? I could probably drive the races out of the frame with a drift, but...
So I got this 1989 voyager xii 1200 on trade. well it will idle for a bit but when you give it gas it stalls out. seem to be a power issue to the...
Last post
If the key is on and you tap the starter button, the headlight should illuminate. Power will now be applied to the fuel pump. You can then verify the...
I can't read the wiring diagram I have. On my '97, there's a red/blue wire under the trunk. It has a female bullet connector, right next to the 4-pin...
Last post
Thank you, that cuts some of my confusion.
Struggling to get the lower Goldwing brake light to work. I just have taillights. My bike came with just...
Looking for a plug and play Headlight LED bulb for the Voyager XII. Tried Mr. Jensee suggestion. Very poor instructions, no one to call, and plastic...
Last post
Funny that you mentioned the GT500. I haven't checked or heard from the restoration guy in five months. I will be checking up on the 500 in January....
Barry and I have been talking about how sensitive XII steering and handling are to all sorts of stuff. They don't tolerate Dunlop 404's on the front,...
Last post
Actually, Gene, I meant the reply for MotoSquirrel and not for you. Somehow I got fumble fingered when I replied.
Hope I'm posting this in the right place . Just picked up an 03 Voyager 1200 for $700 it's in decent shape might need carbs adjusted , also needs...
Last post
... run @ 5 tanks of Seafoam thru'er before you do anything!!!! Might prevent Ya
from an expensive mistake! I wouldn't worry about the sea t'til you...
I have a Markland backrest that is loose on the mount. I am curious if anyone has knowledge of how the pad is connected to the support.
Have you had...
Last post
Be great if it was that easy. I looked to do that first. The studs are either pressed in or welded. They are smooth, no screw head.
That's why I was...
This is what's going on. after a long trip I decided to do a tune up on the bike basically the air filter and plugs and oil change. the reason for it...
Last post
Hello from NJ again. after sitting here this morning looking at this post again , I have to ask, while you did the oil-change - plug rpl - and air...
I've gone all LED lights, so I have some wattage to play with. I plan to install these auxiliary lights: . Kinda pricy ($50 for both, with shipping)....
Last post
Thanks. That's what I originally had in mind. But the wires that came with these lights are very light gauge. I'm still going to use them because...
Yes, I know how to use Search ;)
I've seen few comments about anything except Nexen, which are now listed at Wally World for $80. (But there is free...
Last post
Many years ago I tried Shinko tires on a sport bike. The price was right, but they didn't last very many miles. Over the years on this forum Dunlop...
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
