Got a tech tip for Voyager 12's from your personal experiences, or one complete with pictures and instructions, here's where to post it. You can also ask about tips or procedures here.
I just bought an 88 voYager with 55k..I'm hearing an engine noise that sounds like more than a tick..more like a quiet knock..I just changed oil with...
Last post
Make certain the oil is the correct viscosity, as well... I ran Shell Rotella T6 Full Synthetic in mine, for a while. It is 5W40, I believe. The bike...
Is there a video anywhere that shows the specifics to the Voyager XII when changing the fork seals (retainers, clips and such)? I've changed them in...
Last post
Thanks!
I bit and have springs ordered. They'll be here by next Friday. Now I guess I'll just read and watch!
I guess I could always start and be...
I have a 2003 Voyager and I took it in for state inspection. Radio was working fine when I took it in. Now the radio is dead. Only the time displays....
Last post
Also fuse may look good. The ends of the glass fuse may be bad. I experienced that issue myself.
ok stupid question here I want to change the fork oil but at the present time, I don't have the place or equipment to pull them all apart. So I was...
Last post
I would think that would be a very inaccurate and messy way to do it. Why not drain the oil, then put new oil in at the top caps? Keep in mind if the...
I finally got around to prepping the spare carburetors I have bought and thought perhaps a photo of the residue from some carburetor interiors may be...
Last post
I've been SeaFoam'ing my bikes since 2006: three different bikes, all stored over Minnesota's Winters, with treated gas in the bowls, and the tank....
I have a 2003 Voyager and I took it in for state inspection. Radio was working fine when I took it in. Now the radio is dead. Only the time displays....
I have a loose heel toe shifter on my 98 voyager.
Look like maybe it needs a bushing or something between the case and the back of the shifter. It...
Last post
... fixed mine with a cable tie... around the housing, behind the link and thru the hole in
the shifter and the front fork.... nice and tight... will...
003.jpg Trying to figure out what these are. They were in a bag in a box of spare parts that came with my bike when I bought it. No label on the bag...
Last post
I don't think that the bearing you have are the proper size . The front bearing is supposed to be a 6302 and the rears are supposed to be a 6304 the...
Could someone explain the operation of the igniter box and where it gets it vacuum supply?I am having some intermittent issues with poor performance...
Last post
Hello Scott, You should post those pics under a different title , to warn other newbies of spring time issues, this one has cost you much labor so...
I bought this bike 2 yrs ago, it does 2 things, cold start it only runs on 2 cylinders until it warms up for a minute, I can live with that issue, I...
Last post
Did you ever resolve the issue?
My Dad's '86 is doing the same thing.
I had the same problem with my '02 when I first bought it. I put two new...
For those of you with a Voyager & live outside of North America then you will have found that the radio does not work correctly. This is because the...
Clear title, bike is not running, needs carbs rebuilt as it has sat for two years. 47,000 miles on bike, engine was swapped out for a newer one as it...
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
