Got a tech tip for Voyager 12's from your personal experiences, or one complete with pictures and instructions, here's where to post it. You can also ask about tips or procedures here.
OK, I'm in a bit of a pickle and need some quick help. I rode down to work and was at a stop. I was unsure of which gear I was in so hit the shifter...
Last post
Hey Folks,
I had my shifter linkage shear off at one of the ball joints while on a tour in the middle of rural Pennsylvania last summer....
Here my dilemma. New brake pads,new stainless steel lines,brakes are all bleed good. Rear brake feels good and firm before I ride. Once on the road...
Last post
Yes I did that also. Did everything Carl told me to do. Maybe I will try bleeding again. Gonna have to anyway when I rebuild all my master cylinders...
I decided to add a form of 'restraint' to the lids on my saddlebags., Both showed the scars from the PO not having anything holding them on and them...
Last post
I followed the suggestion to shorten the lines to allow the top to lay on the side of the bag rather than hang. After I thought about it, if the lid...
I have been mulling over how/where to mount a 12V power port socket to the bike for those rare occasions when I might suction mount my TomTom GPS to...
Last post
I just HATE it when I invent something that is already for sale in stores - LOL
Took the Voyager out last night for first night ride and testing. I noticed that the front brake only sometimes causes the brake lights to work. The...
I removed my fairing a couple days ago to pull the radio out for modifications. At least two of the lower tabs where broken off. Can I just superglue...
Last post
Found some awesome stuff at the auto parts store.. Permatex PermaWeld black plastic epoxy. I broke a tit off of one of my side covers (the chrome...
Hello all....I had an unfortunate incident yesterday that resulted in me dumping my bike. Few scrapes and bruises but I also mucked up the fairing on...
Last post
There was some slight changes between the 1986-87 models but all parts on 88-2003 models are interchangeable.
My front suspension is terrible on my 1987 kawasaki voyager,i can feel the bumps very harshly while riding.Seems like maybe I need progressive forks...
Last post
Do you still use your stock air adjustable system with Progressive Fork Springs?
You will still need all the EXTERNAL components of the system. The...
Hi Everyone,
I have a 2001 1200 and have been having what I thought was carburetor problems. My bike had a hesitation at 3200RPM. I took the bike to...
Last post
Go to CRC's website and read about how to use their Valve cleaner. You can use it at the same time you put Seafoam in the gas tank. You can spray the...
my fork lowers are showing their age....which products do you guys recommend?? seems to be oxidation and stains mostly. ive been using steel wool but...
Last post
I powder coated mine they wipe clean with a rag :thmup:
The bike has been setting up for 3 years but the owner said it was started up 3 months ago but has a bad battery so i brought my external battery to...
Last post
That is not the water pump. I think you need to know that there is a cover over the water pump you need to remove (5 ea #8 bolts) It is called the...
K, i got my bike back from service and they didn't replac the hoses attached to the bottom of the carbs. My question is where does the large hose go?...
Last post
Thanks for the info. Whats sad is the carbs were just rebuilt a month ago. Hopefully when i take it back to them i won't get charged.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
